Connector Definitions; Atx Power Connector; Processor Power Connector; Nmi Button - Supero SUPERSERVER 7043M-8 User Manual

S S
UPER ERVER 7043M-8/7043M-6 Manual
5-8

Connector Definitions

ATX Power Connector

The X5DMS-8GM/X5DMS-6GM
power supply connector meets the
SSI (Superset ATX) 24-pin specifi-
cation, however it also supports a 20-
pin power supply connector. Make
sure that the orientation of the PS
connector is correct.
Processor Power
Connector
In addition to the Primary ATX power
connector (above), the 8-pin, 12v
Processor Power connector at J15
must also be connected to your
power supply. See the table on the
right for pin definitions.

NMI Button

The non-maskable interrupt button
header is located on pins 19 and
20 of JF2. Refer to the table on
the right for pin definitions.

Power LED

The Power LED connection is lo-
cated on pins 15 and 16 of JF2.
Refer to the table on the right for
pin definitions.
ATX Power Supply 24-pin Connector
Pin Number Definition
13 +3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
8-Pin +12v Power Supply
Definitions (JF2)
Pin
Number
19
20
Pin
Number
15
16
5-12
Pin Definitions
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW R_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Connector (J15)
Pins Definition
1 thru 4 Ground
5 thru 8 +12v
NMI Button Pin
Definition
Control
Ground
Power LED Pin
Definitions (JF2)
Definition
Vcc
Control