S
S
UPER
ERVER 7043M-8/7043M-6 Manual
!
RESET: Use the reset button to reboot the system.
3-3
Control Panel LEDs
The control panel located on the front of the SC742 chassis has six LEDs that
provide you with critical information related to different parts of the system. This
section explains what each LED indicates when illuminated and any corrective
action you may need to take.
!
Power: Indicates external power is being supplied to the system's power
supply unit. This LED should normally be illuminated when the system is oper-
ating.
!
HDD: Indicates IDE channel activity. On the SuperServer 7043M-8/7043M-
6, this LED indicates CD-ROM drive activity when flashing.
NIC1
!
NIC1: Indicates network activity on LAN1 when flashing.
NIC2
!
NIC2: Indicates network activity on LAN2 when flashing.
3-2