Delta DT2200P Instruction Manual

Delta DT2200P Instruction Manual

4.5 horsepower pressure washer with 4400 cleaning units

Advertisement

To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call 1-866-422-4286
4.5 Horsepower
4400 Cleaning Units
(Model DT2200P)
PART NO. D25130 Rev. 0
Copyright © 2001 Delta Machinery
ESPAÑOL: PÁGINA 23
FRANÇAIS: PAGE 45

Advertisement

Table of Contents
loading

Summary of Contents for Delta DT2200P

  • Page 1 Pressure Washer with 4400 Cleaning Units (Model DT2200P) PART NO. D25130 Rev. 0 Copyright © 2001 Delta Machinery To learn more about DELTA MACHINERY ESPAÑOL: PÁGINA 23 visit our website at: www.deltamachinery.com. FRANÇAIS: PAGE 45 For Parts, Service, Warranty or other Assistance,...
  • Page 2: General Information

    GENERAL INFORMATION Congratulations! You have purchased a high quality product from America’s leading manufacturer of pressure washers. This pressure wash- er, when properly used and maintained, will provide trouble free service. Please read and follow these instructions for proper use and maintenance. All sales of pressure washers are final.
  • Page 3: Important Safety Instructions

    SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and under- stand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read and understand the manual and pay attention to these symbols.
  • Page 4 HAZARD RISK OF EXPLOSION OR FIRE (continued) WHAT CAN HAPPEN HOW TO PREVENT IT • Improperly stored fuel could lead to ac- • Store fuel in an OSHA approved con- cidental ignition. Fuel improperly tainer, in a secure location away from secured could get into the hands of chil- work area.
  • Page 5 HAZARD RISK OF UNSAFE OPERATION WHAT CAN HAPPEN HOW TO PREVENT IT • Unsafe operation of your pressure • Become familiar with the operation and washer could lead to serious injury or controls of the pressure washer. death to you or others. •...
  • Page 6 HAZARD RISK TO FLUID INJECTION WHAT CAN HAPPEN HOW TO PREVENT IT • Your washer operates at fluid pressures • Never place hands in front of nozzle. and velocities high enough to penetrate • Direct spray away from self and others. human and animal flesh, which could •...
  • Page 7 HAZARD RISK OF HOT SURFACES WHAT CAN HAPPEN HOW TO PREVENT IT • During operation, touch only the control • Contact with hot surfaces, such as surfaces of the pressure washer. Keep engines exhaust components, could children away from the pressure washer result in serious burn.
  • Page 8: Box Contents

    BOX CONTENTS English/ Knobs Spanish/ French Operator’s Saddle Manual Bolts Nozzle Cleaning Bagged Parts Handle Engine Frame and Wheel Assembly Accessories Panel Engine High Pressure Chemical Hose Manual Hose Engine Oil Bagged Accessories Panel Multi-Reg Wand Spray Gun ASSEMBLY Connect wand to gun. Tighten Place handle assembly onto securely.
  • Page 9 To Assemble Accessories Panel Place screws (removed earli- Remove top screws on han- er) into the top holes and dle assembly. secure accessories panel assembly to handles. Do Loosen bottom screws on not overtighten. handle assembly. Add engine oil (supplied) to Remove engine.
  • Page 10 OPERATION Know Your Pressure Washer READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Chemical High Hose Pressure...
  • Page 11 GPM: Gallons Per Minute. The unit TO ADJUST PRESSURE of measure for the flow rate of water The pressure setting is preset at the through the pressure washer. factory to achieve optimum pressure CU: Cleaning Units. GPM multiplied and cleaning. If you need to lower the by PSI.
  • Page 12 The nozzle at the end of the multi-reg Place other end of chemical hose wand can be rotated to change the with filter on it into container high pressure spray pattern from a holding chemical/cleaning solu- narrow jet to a 40º fan shape, as tion.
  • Page 13 BEFORE STARTING Read and understand all Important Safety Instructions in the front of this manual and the following Cautions and Warnings before starting the pressure washer. Filter Screen Connect high pressure hose to • Never fill fuel tank completely. pump outlet. Fill tank to 1/2"...
  • Page 14 MAINTENANCE WHEN PERFORMING MAINTENANCE, YOU MAY BE EXPOSED TO HOT SURFACES, WATER PRESSURE, MOV- ING PARTS, OR FIRE RESULTING IN DEATH. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, DISCONNECT SPARK PLUG WIRE, LET ENGINE COOL AND RELEASE ALL WATER PRESSURE. THE ENGINE CON- TAINS FLAMMABLE FUEL.
  • Page 15 PUMP Remove the nozzle from the end of the wand with the 2mm allen This screen filter should be checked wrench provided as shown. periodically and cleaned if necessary. Remove filter by grasping end and removing it from water inlet of pump as shown.
  • Page 16 STORAGE Connect 12 inch length of hose to ENGINE water inlet of pump. Refer to the engine manual for the Add RV antifreeze or windshield manufacturer’s recommendations for washer fluid to hose as shown. storage. PUMP It is recommended that you follow these steps to protect the internal seals of the pressure washer when storing the unit for an extended...
  • Page 17: Troubleshooting Guide

    TROUBLESHOOTING GUIDE PROBLEM CORRECTION CAUSE Engine will not No fuel. Add Fuel. start (see Pressure builds up after Squeeze gun trigger to Engine Manual relieve pressure. two pulls on the recoil for further starter or after initial use. engine trouble- Not choked.
  • Page 18 PROBLEM CORRECTION CAUSE No or low Turn off the engine, then Air in hose. pressure the water source. (initial use) Disconnect the water (continued) source from the pump inlet and turn the water source on to remove all air from the hose. When there is a steady stream of water present, turn water source off.
  • Page 19 PROBLEM CORRECTION CAUSE Have replaced by AWSC. No or low Worn seal or packing. pressure (after Worn or obstructed Have replaced by AWSC. period of nor- valves. mal use.) Worn unloader piston. Have replaced by AWSC. Water leaking Worn or broken o-ring. Check and replace.
  • Page 20: Repair Parts

    REPAIR PARTS Key# Part # Description Engine Pump Kit D22166 High Pressure Hose H140 Chemical Hose 17780 Spray Gun D22837 Multi-Reg Wand NCT001 Cleaning Tool 16797 Allen Wrench D25073 Accessories Panel D22901 Screws D22275 Tire W137 Pal Nut D22316 Handle Assembly (includes Key#10) # See engine manual for service information * Contact an Authorized Service Center D25130...
  • Page 21 NOTES D25130 21- ENG...
  • Page 22: Limited Warranty

    • Use reasonable care in the operation and maintenance of the product as described in the Owners Manual(s). • Deliver or ship the product to the nearest Delta Authorized Warranty Service Center. Freight costs, if any, must be paid by the purchaser.

Table of Contents