Delta DT2200P Instruction Manual page 9

5. To Assemble Accessories Panel
a. Remove top screws on han-
dle assembly.
b. Loosen bottom screws on
handle assembly.
Remove
Loosen
c. Place grooves in accessories
panel assembly onto screws
and slide panel assembly
into place.
Screws
d. Place screws (removed earli-
er) into the top holes and
secure accessories panel
assembly to handles. Do
not overtighten.
6. Add engine oil (supplied) to
engine. Refer to engine manual
supplied by engine manufacturer
for correct procedure.
NOTE: There will be a slight amount
of oil in the engine from factory test-
ing.
NOTE: The high pressure pump was
filled with oil at the factory. There is
no need to add oil at this time, see
the Maintenance section of this man-
ual for Maintenance information.
9- ENG
D25130