Delta DTT2450 Instruction Manual

Delta DTT2450 Instruction Manual

6.5 horsepower pressure washer with 5390 cleaning units

Advertisement

To learn more about DELTA MACHINERY visit our website at:
www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call 1-866-422-4286
6.5 Horsepower
Pressure Washer with
5390 Cleaning Units
(Model DTT2450)
PART NO. A04032 Rev. 0 4/04
Copyright © 2004 Delta Machinery
ESPAÑOL: PÁGINA 17
FRANÇAIS: PAGE 33

Advertisement

Table of Contents
loading

Summary of Contents for Delta DTT2450

  • Page 1 To learn more about DELTA MACHINERY visit our website at: www.deltamachinery.com. For Parts, Service, Warranty or other Assistance, please call 1-866-422-4286 6.5 Horsepower Pressure Washer with 5390 Cleaning Units (Model DTT2450) PART NO. A04032 Rev. 0 4/04 Copyright © 2004 Delta Machinery ESPAÑOL: PÁGINA 17...
  • Page 2: Safety Guidelines - Definitions

    • Heat will expand fuel in the tank which could result in spillage and possible fire explosion. • Operating the pressure washer in an ex- plosive environment could result in a fire. A04032 which, if not avoided, may result in minor or moderate injury.
  • Page 3 HAZARD HOW TO PREVENT IT • Never operate pressure washer in an area containing dry brush or weeds. • Always keep pressure washer a minimum of four feet away from surfaces (such as houses, automobiles, or live plants) that could be dam- aged from muffler exhaust heat.
  • Page 4 They may not be able to recognize the hazards of this product. HAZARD HOW TO PREVENT IT • If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting.
  • Page 5 • Keep children away from the pressure washer at all times. • Do not overreach or stand on an unstable support. • Do not use pressure washer while standing on a ladder. • Grip gun/wand firmly with both hands. Expect the gun to kickback when triggered.
  • Page 6: Carton Contents

    Engine Engine Frame and Manual Wheel Assembly Engine High Pressure Hose ASSEMBLY INSTRUCTIONS Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place. Connect wand to gun.Tighten securely.
  • Page 7: Basic Elements Of Apressure Washer

    Adjustable Spray Wand High Pressure Pump (located inside the shroud) BASIC ELEMENTS OF A PRESSURE WASHER High Pressure Pump (located inside the shroud): Increases the pressure of the water supply. Engine: Drives the high pressure pump. High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand.
  • Page 8 DO NOT use hot water, use cold water only. NEVER turn water supply off while pressure washer engine is running or damage to pump will result. DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed.
  • Page 9: How To Apply Chemicals/Cleaning Solvents

    HOW TO USE SPRAY WAND Your pressure washer is equipped with a multi-adjustable spray wand with both high and low pressure settings. The high pressure setting is for cleaning and rinsing, the low pressure setting is for applying chemicals or cleaning solutions to surfaces.
  • Page 10: Shutting Down

    STARTING Prior to starting, refer to your engine manual for proper starting procedure. In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine.
  • Page 11: Nozzle Cleaning

    DO NOT smoke or work near open flames while performing maintenance. To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions,...
  • Page 12: Pressure Washer

    PRESSURE WASHER Drain all water from high pressure hose, coil it, and store it in cradle of the pressure washer handle. Drain all water from spray gun and wand by holding spray gun in a vertical position with nozzle end pointing down and squeezing trigger.
  • Page 13: Troubleshooting Guide

    TROUBLE SHOOTING GUIDE PROBLEM No fuel. Engine will not Pressure builds up after two pulls on start (see Engine the recoil starter or after initial use. Manual for further engine Engine not primed troubleshooting) Spark plug wire not attached. No or low Spray wand not in high pressure.
  • Page 14 PROBLEM Worn seal or packing No or low pressure Worn or obstructed valves. (after period of Worn unloader piston. normal use) Worn or broken o-ring. Water leaking at gun/spray wand Loose hose connection. connection Water leaking Loose connections. at pump Piston packings worn.
  • Page 15 NOTES 15- ENG A04032...
  • Page 16: Warranty

    • Use reasonable care in the operation and maintenance of the product as described in the Owners Manual(s). • Deliver or ship the product to the nearest Delta Authorized Warranty Service Center. Freight costs, if any, must be paid by the purchaser.

Table of Contents