Table of Contents
Advertisement
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call 1-866-422-4286
5 Horsepower
Pressure Washer with
6000 Cleaning Units
(Model D2400H)
PART NO. D28609 Rev. 0
Copyright © 2003 Delta Machinery
ESPAÑOL: PÁGINA 23
FRANÇAIS: PAGE 45
Advertisement
Table of Contents
Related Manuals for Delta D2400H
Summary of Contents for Delta D2400H
- Page 1 To learn more about DELTA MACHINERY visit our website at: www.deltamachinery.com. For Parts, Service, Warranty or other Assistance, please call 1-866-422-4286 5 Horsepower Pressure Washer with 6000 Cleaning Units (Model D2400H) PART NO. D28609 Rev. 0 Copyright © 2003 Delta Machinery ESPAÑOL: PÁGINA 23...
-
Page 2: Safety Guidelines - Definitions
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols. Indicates an imminently hazardous situation which, if not avoided, will result in death... -
Page 3: Important Safety Instructions
• Heat will expand fuel in the tank which could result in spillage and possible fire explosion. • Operating the pressure washer in an ex- plosive environment could result in a fire. • Materials placed against or near the pres-... - Page 4 D28609 HAZARD HOW TO PREVENT IT • If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting.
-
Page 5: Risk Of Unsafe Operation
HOW TO PREVENT IT • During operation, touch only the control surfaces of the pressure washer. Keep children away from the pressure washer at all times. They may not be able to recognize the hazards of this product. 5- ENG... -
Page 6: Consumer General And Service Information
You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit. -
Page 7: Carton Contents
Note: Photographs and line drawings used in this manual are for reference only and do not represent a specific model. Engine Frame and Wheel Assembly Engine Oil Spray Gun Surface Cleaning Guide CARTON CONTENTS Handle Engine Manual Bagged Handle Knobs Saddle Bolts Chemical... -
Page 8: Assembly Instructions
ASSEMBLY INSTRUCTIONS Place handle assembly onto frame and connect handle to frame. Attach high pressure hose to gun. Tighten securely. To Assemble "Water Vroom" surface cleaning guide. NOTE: If not using the "Water Vroom" surface cleaning guide proceed to step 4. Loosen knob (a) and rotate "J"... - Page 9 Adjust spray wand to desired height needed for job to be performed. Snap spray wand (c) into place on surface cleaning guide. Rotate "J" hook over spray wand and tighten knob securely. See To Use Spray Wand paragraph in the Operation section of this manual to choose and assemble the correct nozzle for the job to be performed.
- Page 10 To Assemble Quick Connect Grommets: Squeeze grommet and place into hole, fitting groove to rim. Push grommet into place. Repeat steps until all grommets are assembled. To Assemble Quick Connect Nozzles: Remove five colored quick connect nozzles from plastic bag and insert them into correct grommet.
-
Page 11: Basic Elements Of A Pressure Washer
Connect Spray Wand Engine BASIC ELEMENTS OF A PRESSURE WASHER High Pressure Pump: Increases the pressure of the water supply. Engine: Drives the high pressure pump. High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand. -
Page 12: Basic Elements Of Engine
Water Supply: All pressure washers must have a source of water. The minimum requirements for a water supply are 20 PSI and 5 gallons per minute. PRESSURE WASHER OPERATING FEATURES PRESSURE ADJUSTMENTS The pressure setting is preset at the factory to achieve optimum pressure and cleaning. - Page 13 TO USE SPRAY WAND Your pressure washer is equipped with five spray nozzles. Each nozzle is color coded and delivers a specific spray pattern for a particular cleaning purpose. The size of the nozzle determines the size of the fan spray and the pressure out of the nozzle.
- Page 14 HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach. To Apply chemicals: Press chemical hose onto barbed fitting located near high pressure hose connection of pump as shown.
-
Page 15: Shutting Down
STARTING Prior to starting, refer to your engine manual for proper starting procedures for your engine type. In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. -
Page 16: Maintenance
DO NOT smoke or work near open flames while performing maintenance. To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as high-temperatures or dusty conditions, more frequent maintenance checks will be required. -
Page 17: How To Clean The Water Inlet Filter
Clean filter by flushing it with water on both sides. Re-insert filter into water inlet of pump. NOTE: Cone side faces out. NOTE: Do not operate pressure washer without filter properly installed. Filter Screen 17- ENG D28609... - Page 18 It is recommended that you follow these steps to protect the internal seals of the pressure washer when STORING THE UNIT FOR MORE THAN 30 DAYS AND/OR WHEN FREEZING TEMPERATURES ARE EXPECTED.
-
Page 19: Troubleshooting Guide
TROUBLE SHOOTING GUIDE PROBLEM No fuel. Engine will not Pressure builds up after two pulls start (see Engine on the recoil starter or after initial Manual for use. further engine troubleshooting) Choke lever in the “No Choke” position. Spark plug wire not attached. Engine ON/OFF switch in OFF position Choke lever in the “Choke”... - Page 20 PROBLEM Spray wand not in low pressure. Will not draw chemicals Chemical filter clogged. Chemical screen not in chemical Chemical too thick. Pressure hose is too long Chemical build up in chemical injector. Worn seal or packing No or low pressure Worn or obstructed valves.
- Page 21 NOTES 21- ENG D28609...
-
Page 22: Warranty
• Use reasonable care in the operation and maintenance of the product as described in the Owners Manual(s). • Deliver or ship the product to the nearest Delta Authorized Warranty Service Center. Freight costs, if any, must be paid by the purchaser.