Watching Ntsc On A Pal Tv; Resetting The Player; Titles, Chapters, Groups And Tracks - Pioneer DV-565A Operating Instructions Manual

10 Additional information

Watching NTSC on a PAL TV

Most models of the newly developed
countdown PAL TV system detect 50 Hz
(PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display
without vertical shrinkage. However, in some
cases, the image may appear without color.
If your PAL TV does not have a V-Hold control,
you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold
control, adjust it until the picture stops
rolling.
On some TVs, the picture may shrink
vertically, leaving black bands at the top and
bottom of the screen. This is not a
malfunction; it is caused by the NTSC to PAL
conversion.
74
En

Resetting the player

Use this procedure to reset all the player's
settings to the factory default.
1 Switch the player into standby.
2 Using the front panel buttons,
hold down the  (stop) button and press
 STANDBY/ON to switch the player back
on.
All the player's settings are now reset, and
you should see the 'Let's Get Started' screen.
Titles, chapters, groups and
tracks
DVD-Video discs are generally divided into
one or more titles. Titles may be further
subdivided into chapters.
Title 1
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
DVD-Audio discs are divided into one or more
groups that can each contain a number of
tracks.
Group 1
Track 1 Track 2 Track 3
CDs, SACDs and Video CDs/Super VCDs are
divided into tracks.
Track 1 Track 2 Track 3 Track 4
Title 2 Title 3
Group 2 Group 3
Track 1 Track 1 Track 2
Track 5 Track 6