Epson FX-BO Operation Manual page 61

FF/CR
FF
­
'Mim;
FF - Form feed
­
'45.Ii4{.juh'
CHR$(12);
-
l@iiil4i!.i1i
When this code is input, all the data stored in the print buffer is
printed out and then paper feed is carried out in accordance with the
predetermined page length.
This code cancels the Enlarged mode set by the SO code.
ESC C and ESC C 0
'14.UM'
CR
Ubi"';
CR - Carriage return
'tJ.li§¥iioh'
CHR$(13);
nhlt4i!.i"
'-14.iMtl
'tFiUiUli
When this code is input, all the data stored in the print buffer is
printed.
­
When AUTO
--:--===-===-==
FEED XT (Pin No. 14 of the interface connector) is at
"LOW" level, the paper is advanced one line automatically after the
­
execution of printing by the CR code.
Input of CR code with line feed will cancel the Enlarged mode set by
the SO code.
If no data precedes the CR code, or if all preceding data is SPACE,
-
the carriage assembly does not move. Under this condition, if AUTO
FEED XT is at "LOW" level
or
if the DIP switch pin
2-4
is ON, the
paper is advanced by one line.
LF
10 'Carriage return
20 LPRINT "Underscore
by
CR";CHR$(13);
30 LPRINT "
It
Unperscore
by
CR
3-12