-
1. 7.3 Cut sheet
-
The FX-80 accommodates cut sheets measuring 7.25" to 8.5" by 12" (maximum).
-
NOTE:
When using cut sheet, be sure to remove the optional tractor unit.
To load a cut sheet, observe the following procedure.
1.
Raise the printer cover.
2. Slide both sprockets outward to the sides and lock the sprocket lock levers.
3. Pull the scale toward the front of the printer to detach the scale from the platen.
4. Unlock the release lever.
-
Release lever
Paper guide roller
-
-
-
Loading of Cut Sheet
5. Insert the cut sheet between the paper guides at the rear part of the printer
mechanism. The paper must be positioned so that the sprockets will not be in
the way.
-
-
-
-
-
-
1-14