Table of Contents
Advertisement
-
-
-
<Additional Information>
-
(1) Paper arrangement
-
When the FX-80 is to be used on a desk or a bench, arrangement of the pin-feed
paper in parallel with the FX-80 as shown below will permit the paper to be folded
_
in an accordion style.
-
-
~
~
-
Course of
-
paper
-
-
-
Example of Paper Arrangement
-
(2) Column layout on pin-feed paper
-
When pin-feed paper of from 9.5" to 10" in width is supplied with the FX-80, the
graduations on the scale can be used as the indexes of print column positions (1 to
-
80). Alignment of the print start position on pin-feed paper with the 1st column
position at the extreme left of the scale will facilitate column layout.
-
Accordingly, center the paper by adjusting it to these indexes of the scale.
-
(3) Removal of pin-feed paper
To remove the pin-feed paper, follow either of the two methods described below.
1) Pull the paper forward out of the printer by turning paper feed knob.
-
NOTES:
1. Do not attempt to pull out the paper in the backward direction.
-
2. Do not turn the paper-feed knob while the power is ON.
2) Feed the paper out of the printer by pushing the Line Feed or Form Feed
-
switch. At this time, the power switch of the printer must be set to the ON
position and the printer must be in the OFF-LINE mode.
-
-
-
-
1-11
Advertisement
Table of Contents
