Table of Contents
Advertisement
-
9. Gently turn the paper feed knob clockwise.
-
-
-
-
-
-
Insertion of Fanfold Paper
10. After the leading edge of the paper has emerged from the printer, smooth out
the wrinkles of the paper by pulling the sprockets to both sides.
11. Push the scale back into position.
12. Adjust the gap to the thickness of paper to be used.
NOTES:
1. Remove the optional tractor unit when using pin-feed paper measuring
9.5"
to
10,(1' in width.
2. Do not perform reverse paper feed after short tear-off of the paper.
3. The paper cutter is designed to cut the paper at the perforation and not at any
other part of the paper.
4. Use carbon copies joined by spot-pasting or line-pasting.
-
-
-
-
1-8
-
Advertisement
Table of Contents
