Epson FX-BO Operation Manual page 59

LF
LF
UijUit:j
LF - Line feed
-
"""i'W.ili
CHR$(10);
-
hllngU"Ii
When this code is input, all the data stored in the print buffer is
printed out and then line feed is carried out.
If no data precedes the LF code, or if all preceding data is SPACE,
only line feed is performed.
This code cancels the Enlarged mode set by the SO code.
The amount of paper feed may be set by ESC 0, ESC 1, ESC 2, ESC
3 or ESC A code. If the data is input in the order of print data
~
CR
~ LF, data
will
be printed by the CR code. Then the printer carries
out one line feed because no print data precedes the LF code.
Li4¥trM'l
SO, ESC 0, ESC1, ESC 2 and ESC 3, ESC A and ESC W
-­
-
-
-
-
-
-
3-10