Installation - CDA ci261 Manual For Installation, Use And Maintenance

Oil Paint: The stain should be eliminated before it dries by
applying thinner on it. Then it should be rubbed with detergent
and washed.
Burnt Stain: If your cloth is suitable for use of lye, you can add lye
into your washing water. For woollens, a cloth damped in
oxygenated water should be covered on the stain and it should
be ironed with a dry cloth on it. It should be washed after rinsing
well.

Installation

Transit bolts, located at the rear of the
appliance, must be removed prior to using
the appliance, to prevent damage.
• Loosen the transit bolts using a
suitable spanner by turning them
anticlockwise and then remove
them.
• Cover the holes with the plastic
plugs supplied.
Do not throw the transit bolts away.
If you need to move the washing machine after installation you
should first replace the transit bolts.
Do not install your machine on rugs or similar surfaces.
For your machine to work silently and without any vibration, it
should be installed on a flat, non-slippery and solid surface.
Never put cartons, wooden blocks or similar materials under the
machine to level the surface under it.
22