CDA ci261 Manual For Installation, Use And Maintenance page 29

Fault
Unsatisfactory washing
result
Grey spots appear on
the washing
Spin cycle does not
run or runs late
Possible Causes
The soiling of the load
does not match the
programme
Insufficient amount of
detergent used
Machine overloaded
Hard water being used
Load unbalanced in
machine
This may be spots of oil,
cream or ointment
Not a fault, the unbalanced
load detection system has
been activated
29
Suggested Actions
Select a programme
suitable for the soiling
level of your load
Adjust the amount of
detergent based on the
soiling level of the load
Do not load more than
the recommended weight
of washing into the
machine
Adjust the amount of
detergent as
recommended by the
detergent manufacturer
Distribute the load evenly
into the machine
Apply the maximum
amount of detergent
recommended by the
detergent manufacturer in
the next washing
operation
The unbalanced load
control system will try to
spread your washing
evenly.
The spin operation will
start after spreading your
washing. Spread your
washing in the machine
evenly in the next
washing operation.