Table of Contents
Advertisement
Pump Filter
The pump filter system prevents ingress of lint or foreign objects
into the drain pump, reducing the risk of damage.
The pump filter should be cleaned regularly, every two to three
months at least.
To Clean the Filter:
• Open the kickplate cover by
pulling down on the lug at the
top of the cover.
• Place a container under the
filter cover to collect the flow
of the remaining water from
the machine.
• Loosen the filter cover by
turning it slowly anticlockwise
until the remaining water has
drained away.
• When all the water has
drained out of the machine,
turn the filter cover several
times until the filter can be
completely removed.
• Remove any objects caught in the filter and the drain
pump.
• Refit the filter by turning it clockwise.
• Replace the kickplate cover.
Please note: Failure to replace the filter cover properly will cause
water to leak from the machine.
To avoid injury, do not carry out this operation when the wash
water is at a temperature over 30ºC.
18
Hide quick links:
Advertisement
Table of Contents
