Installation And Assembly; Washing Machine - CDA CI240 Manual For Installation, Use And Maintenance

washing machine

1
Unpacking the Washing Machine
• Remove the base, corner protectors and top cover (Figure 1).
a Remove the base, corner protectors and
Removing the Transit Bolts
• Remove the screws holding the plastic covers to the back of the
washing machine (Figure 2 and 3).
• Loosen and remove the 3 transit bolts (Figure 3).
• Cover the holes with the plastic plugs supplied.
Do not throw the transit bolts away. If you need to move the washing
machine after installation you should first replace the transit bolts.
a There are 3 blocking screws on the back
b To loose and completely remove the 3
c Fit the 3 plastic plugs supplied in the

installation and assembly

washing machine
washing machine washing machine
UNPACKING AND
UNBLOCKING THE
washing machine
WASHING MACHINE
UNPACKING AND
1
UNBLOCKING THE
UNPACKING
installation and assembly
WASHING MACHINE
UNPACKING AND UNPACKING AND
1 1
UNBLOCKING THE UNBLOCKING THE
top cover.
WASHING MACHINE WASHING MACHINE
UNPACKING AND
1
UNBLOCKING THE
a Remove the base, corner protectors and
top cover.
WASHING MACHINE
a Remove the base, corner protectors and a Remove the base, corner protectors and
top cover. top cover.
a Remove the base, corner protectors and
top cover.
UNBLOCKING
a There are 3 blocking screws on the back
of the washing machine.
of the washing machine.
b To loose and completely remove the 3
screws together with the metal washer
a There are 3 blocking screws on the back a There are 3 blocking screws on the back screws together with the metal washer
of the washing machine. and the black rubber and plastic tubes of the washing machine.
and the black rubber and plastic tubes
that make up the blocking system.
that make up the blocking system.
b To loose and completely remove the 3 b To loose and completely remove the 3
a There are 3 blocking screws on the back
c Fit the 3 plastic plugs supplied in the screws together with the metal washer screws together with the metal washer
of the washing machine.
and the black rubber and plastic tubes holes you removed the screws from. and the black rubber and plastic tubes
holes you removed the screws from.
that make up the blocking system. that make up the blocking system.
b To loose and completely remove the 3
screws together with the metal washer
c Fit the 3 plastic plugs supplied in the c Fit the 3 plastic plugs supplied in the
and the black rubber and plastic tubes
holes you removed the screws from. holes you removed the screws from.
that make up the blocking system.
c Fit the 3 plastic plugs supplied in the
holes you removed the screws from.
Do not throw the blocking screws away.
You may need to move the washing
machine at a later date.
Do not throw the blocking screws away.
Do not throw the blocking screws away. Do not throw the blocking screws away.
You may need to move the washing
You may need to move the washing You may need to move the washing
machine at a later date. machine at a later date.
machine at a later date.
Do not throw the blocking screws away.
You may need to move the washing
machine at a later date.
installation and assembly
a
installation and assembly installation and assembly
UNPACKING
UNPACKING UNPACKING
UNPACKING
UNBLOCKING
UNBLOCKING UNBLOCKING
UNBLOCKING
c
72
72
72
72
a
a a
a
c
c c
c
72
fig. 1
fig. 2
fig. 3
fig. 4
3