CDA ci261 Manual For Installation, Use And Maintenance page 13

feature that reduces the wash time and energy consumption when
the load in the drum is less than half the capacity for the chosen
programme. When the machine detects this, the half load symbol
shows on the display.
If you want to give the half load of washing a particularly thorough
wash the half load feature can be switched off by pressing the
"Rapid Wash" button.
Easy Iron
This function reduces creasing of garments to make them easier
to iron.
Cancelling a Programme
If you want to cancel a programme that is running:
• Switch the "Programme Control" knob to "0".
• Your machine will stop the washing operation and the
programme will be cancelled.
• To empty the water from the machine, switch the
"Programme Control" knob to any programme.
• Your machine will perform the necessary draining
operation and cancel the programme.
Finishing a Programme
When a programme finishes, the word "End" will flash on the
display for 2 minutes.
After this the
opened.
• Switch the "Programme Control" knob to "0"
• Turn the water supply off.
• Switch off (or unplug) the electricity supply to your machine.
• Leave the door open to allow the inside of the machine to
dry after removing the washing.
symbol will flash showing that the door can be
13