Table of Contents
Advertisement
Installation
Transit bolts, located at the rear of the
appliance, must be removed prior to
using the appliance to prevent damage.
•
Loosen the transit bolts using a
suitable spanner by turning them anti-
clockwise and then remove them.
•
Cover the holes with the plastic plugs
supplied.
Do not throw the transit bolts away.
If you need to move the washing
machine after installation you should
first replace the transit bolts.
Do not install your machine on rugs or
similar surfaces.
For your machine to work silently and
without any vibration, it should be
installed on a flat, non-slippery and solid
surface.
Never put cartons, wooden blocks or
similar materials under the machine to
level the surface under the appliance
28
fig. 8
Advertisement
Table of Contents
