Page 1
Manual for Installation, Use and Maintenance Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
Contents Page 1 Important information Page 2 Warnings Page 3 Washing machine specifications Page 4 Unpacking the washing machine and removing the transit bolts Page 5 Connecting to the mains water supply Page 6-7 Levelling and electrical information Page 8 Before first use Page 9 Preparing garments for washing...
Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model...
Warnings To avoid the risk of fire, electric shocks, injury or damage when using your washing machine, please take the following precautions: • Please read all the instructions before using the washing machine. • Do not wash items that have previously been cleaned, washed, soaked or treated with petrol, solvents for dry cleaning, other inflammable substances or explosives, as they produce fumes that could catch fire or explode.
There are 3 blocking screws on the back of the washing machine. b To loose and completely remove the 3 screws together with the metal washer and the black rubber and plastic tubes that make up the blocking system.
Connecting to the Mains Water Supply The water supply hose is located inside the drum. • Connect the bent end of the hose to the threaded inlet of the electrovalve located at the rear of the washing machine. • Connect the other end of the hose to the water intake. Then securely tighten the connecting nut.
Levelling • To reduce the noise level from the washing machine and to prevent unnecessary movement during use, you should ensure the washing machine is level using the adjustable feet. • First, fix and level the rear feet. When they are properly fixed, secure the metal locknut tightly against the underside of the washing machine.
Electrical information Warning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. Remove the fuse cover and fuse. 2.
Before First Use • When your washing machine has been correctly installed, we recommend that you pre-clean the machine. This is to check that the installation, the connections and the drainage are all correct, and to thoroughly clean the inside of the washing machine before any wash programmes are run (see the operating instructions on the following pages).
Preparing Garments for Washing Preparation • Before placing the clothes in the drum, make sure all the pockets are empty (Figure 10). Any small objects may block the drain pump. Sorting the Clothes Sort the clothes according to fabric and how they are made: •...
Detergents and Additives Your washing machine’s detergent dispenser has three compartments. • Add the detergent or additive to the detergent dispenser before starting a Your washing machine’s detergent the wash programme (Figure 14). b If you are going to use liquid detergent The detergent dispenser is designed to allow the use of liquid detergents rather than adding them to the drum.
Selecting the Wash Programme To select a wash programme: • Turn the programme selector dial clockwise to the desired function. • The display on the control panel will light up. • Press the Start/Pause button to begin the programme. Start/Pause Time delay button button Programme selector...
Selecting the Wash Programme When you select the programme, the following information will be displayed: 1. Wash programme phases: Prewash Wash Rinse Spin-drying and draining 2. Spin speed 3. Programme number (for a few seconds) and then programme duration. 4. Additional functions: Easy iron Extra rinse Intensive wash...
Washing Machine Programmes Recommended Programme Fabric type temperature Cotton/Linen Normal cold Cold delicate colours very light soil Cotton/Linen Quick 30ºC whites/colours very light soil Cotton/Linen Normal 30ºc delicate colours light soil Cotton/Linen Normal 40ºC fast colours light soil Cotton/Linen 5 (*) Normal 60ºC fast colours medium soil...
Page 15
Washing Machine Programmes Wash Max. Programme load of product description clothes (Kg) compartment Normal wash, rinses, automatic additive absorption if desired and long final spin SHORT wash, rinses, automatic additive absorption if desired and final long spin Normal wash, rinses, automatic additive absorption if desired and long final spin...
SPIN SPEED SELECTION SPIN DRYING Spin Speed Selection and Anti-Crease The wash options must always be selected after choosing the wash programme. Any programme You should first select the wash programme and then select the wash options change during selection cancels the previously (Changing the programme cancels the preset selected options).
SPIN DRYING Time Delay Time delay selection button A delay of up to 24 hours can be selected. Time delay selection button The delay must be selected after choosing the Spin speed selection and anti-crease wash programme. • A delay of up to 24 hours can be selected. The delay must be selected after To select the delay time, press the clock button.
Starting Up Start/Pause button • To start up the washing machine you have to press the Start/Pause button (Figure 27). • The time remaining (in minutes) until the end of the programme will appear on the display at all times. Lock Function Lock function selection •...
PAUSE function. If the programme is changed on the selector dial during the washing and drying process, the washer will go onto PAUSE status and the programme will be cancelled. If you need to add or remove a garment, press the Start/Stop button and make sure that the water level is not above the door overflow level and that the temperature inside is not high.
Maintenance • After each wash, leave the door open for a while to allow the air to circulate freely inside the machine. • From time to time, depending on the hardness of your water, it is recommendable to run a full wash cycle using a decalcifying product. This will extend the life of your washing machine.
CLEANING THE ACCESSIBLE FILTER AND THE OUTSIDE Cleaning the Filter Clean the accessible filter if the drain pump • Clean the accessible filter if the drain pump is blocked by any is blocked by any foreign objects. foreign objects. a Open the kickplate cover with the aid of a coin and by pulling gently on it.
Safety and Troubleshooting • If you detect any problems with your washing machine, you will probably be able to rectify them yourself by consulting the following instructions. • If this is not the case, unplug the appliance and contact the technical assistance number. Do not open up the washing machine.
Page 23
This is why the hatch cannot be opened for 2 minutes. Other indications • The washing machine can detect other indications. When this happens a number of other indicators appear on the display: F05, F06..., F10. If this happens, call CDA Customer Care.
Page 24
Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...