Additional Functions - Angelcare AC1100 Instruction Manual

2.7 LINK BETWEEN UNITS
Good link
Low link
Lost link
Talk-Back Button

3. ADDITIONAL FUNCTIONS

3.1 INFRARED NIGHT VISION
Camera
Out of range Icon on
LCD screen
Power Key
4 Infrared
LEDs
17
• The antenna icon, displayed on the LCD screen, indicates
the strength of the link to the Nursery Unit.
• When the link between the Parent Unit and the Nursery
Unit is lost, the OUT OF RANGE alarm icon will be
displayed on the Parent Unit screen.
• On the top bar, the LOST LINK icon will be displayed.
In case the connection between the Nursery Unit and the
Parent Unit is completely lost, you can follow these steps
to restore the connection.
1. Make sure the Parent Unit and the Nursery Unit are
turned off.
2. Turn the Nursery Unit on.
3. Press and release the left wing 4 times. The night light
will flash.
4. Turn the Parent Unit on. A blue screen will appear with
the lost link icon on the top bar.
5. While pressing the talk-back button on the right side of
the Parent Unit, press and release the power key on the
Parent Unit.
6. Video will appear on the Parent Unit's screen, meaning
that the connection was successfully restored.
There are 4 built-in infrared LEDs to display a better image
on the Parent Unit when there is no sufficient lighting in the
room. When the infrared LEDs are in use, the image is
shown in black and white on the Parent Unit screen.
The Vision mode is always on AUTO when you turn the
Parent Unit ON. Press the NIGHT VISION icon to scroll
through the 3 available modes.
1. AUTO: the infrared LEDS are turned on
automatically when the lighting is not
sufficient. The image transition takes 20
seconds.
2. ON: The infrared LEDS are ON at all times.
3. OFF: The infrared LEDS are OFF at all times.
The Moon icon appears when the infrared
LEDS are on.
E
N