Related Manuals for Angelcare AC1100
Summary of Contents for Angelcare AC1100
- Page 1 INSTRUCTION MANUAL with Touch-Screen THE ULTIMATE DIGITAL BABY MONITOR Video, Movement and Sound Model AC1100 AC11000 UK 5.13.2012...
-
Page 2: Table Of Contents
Nursery Unit battery Size: 33 cm X 33 cm (13” x 13”) back-up. Thickness: 6 mm (1/4”) We, at Angelcare®, stand behind all of our products. If you are not completely satis ed or have any questions, please contact your Distributor. -
Page 3: Frequently Asked Questions
For short periods of time (2 weeks) you can use mains convertors, however for longer periods please use the appropriate mains adaptor which can be supplied by the local Angelcare dealer (please visit our website for the International Dealers). If you only wish to monitor movement, you can use your SensorPad and Nursery Unit on batteries or mains. Note that batteries will not last... - Page 4 FREQUENTLY ASKED QUESTIONS ® CAN I USE THE ANGELCARE MOVEMENT MONITOR IN A TRAVEL COT? Your SensorPad will give you optimal performance if it is placed on a steady at rigid surface. We recommend 6mm ply cut to 10cm bigger than the pad.
-
Page 5: Warnings
• Your monitor can be used in any crib that is stationary and designed to safely hold a baby. YOU MUST place a hard board under the SensorPad. This support must be at least 13 inches long on all four sides and 1/4 inch thick. Only use your Angelcare ®... - Page 6 • When the monitor is in use, do not use a crib mobile or other crib accessories that may produce vibrations. Other sources of vibrations may include fans, washing machines, loud music, etc. These sources of vibration may interfere with the performance of your Angelcare ®...
-
Page 7: Tips To Improve Reception
TIPS FOR IMPROVING RECEPTION • There is an increase of different products on the market manufactured with wireless 2.4 GHz technology, which may cause interferences with your baby monitor. Install your Angelcare ® baby monitor away from microwaves, cordless phones, Wi-Fi technology, computers and routers (and/or any other similar electronic devices), as these devices may disrupt and/or diminish the transmission of the monitor’s signals, alarm signals and range. -
Page 8: Features & Components
Microphone (batteries not included) SENSORPAD VERY IMPORTANT! You will need to ® The Angelcare Under the place a 6mm (1/4”) thick piece of Mattress SensorPad will detect plywood measuring 33 cm (13”) X 33 your baby’s every movement and cm (13”). -
Page 9: Angelcare Monitor Installation
ANGELCARE ® MONITOR INSTALLATION Please refer to SETTING pages for further details A. INSTALL THE PARENT UNIT 1. Remove the belt clip, unscrew the back panel and insert the 3 AAA NIMH rechargeable batteries included into Parent Unit. 2. Connect the AC adapter to the Parent Unit charger and plug adapter into the electrical outlet. - Page 10 C. INSTALL THE NURSERY UNIT AND SECURE ALL CORDS 1. Unscrew the bottom of the Nursery Unit and insert 3 AAA regular alkaline batteries. 2. Connect the AC adapter to Nursery Unit and plug adapter to an electrical outlet. 3. Connect the SensorPad cord to the Nursery Unit.
-
Page 11: Testing Your Angelcare Monitor
® TESTING YOUR ANGELCARE MONITOR • Test your monitor BEFORE using it for the rst time. ® • The Angelcare Monitor can be used with the factory settings or you can modify them in the menu. • ONLY use rechargeable batteries in the Parent Unit. -
Page 12: Main Menu Settings
2. Press OK to con rm setting. When enabled, an alarm will be triggered when no movement is detected for 20 seconds. If you are receiving false alarms, you will Angelcare® Under the MOVEMENT have to adjust the SensorPad sensitivity in the SUB MENU. - Page 13 ICON 2. Press OK to con rm. 1.4 VIDEO The video monitor function is activated when you receive your Angelcare ® Monitor. If you wish to disable this function, press the VIDEO icon VIDEO icon then press OK to con rm the setting.
- Page 14 1.6 TEMPERATURE The baby’s room temperature is always indicated on the top bar of the screen. By setting the temperature alarm, you will be alerted if the room temperature is too cold or too hot. If the temperature that you have set goes out of range, 4 consecutive beeps will be heard every 4 seconds and the temperature alarm icon will be displayed in TEMPERATURE the center of the LCD screen.
-
Page 15: Sub-Menu Settings
2. SUB-MENU SETTINGS INSTRUCTIONS IMPORTANT NOTE: Press the OK icon to con rm all settings and adjustments done on the SUB-MENU. When the screen remains idle for 1 minute, it will automatically return to video display. In such a case, any changes made will not be saved. - Page 16 2.3 VOX ADJUSTMENT The Vox function is the sound reception on “voice activated mode”. Press on VOX icon to The microphone sensitivity can be adjusted as follows: A low Vox activate or deactivate the microphone sensitivity means that the sound from the baby’s room Voice activated mode.
-
Page 17: Additional Functions
2.7 LINK BETWEEN UNITS • The antenna icon, displayed on the LCD screen, indicates the strength of the link to the Nursery Unit. Good link • When the link between the Parent Unit and the Nursery Unit is lost, the OUT OF RANGE alarm icon will be displayed on the Low link Parent Unit screen. - Page 18 ZOOM icon 3.3 PAGER - PARENT UNIT LOCATER ® Your Angelcare Monitor is equipped with a paging system that allows you to locate the Parent Unit quickly. 1. Press the Push Button on the top of the Nursery Unit for less than 2 seconds.
-
Page 19: Problem Solving
• Place crib near a solid supporting wall to avoid SensorPad from detecting movement from outside crib. ® • You may need to decrease the sensitivity, refer to the section Testing your Angelcare monitor and the Movement section. NO SOUND IS BEING TRANSMITTED •... -
Page 20: Limited Warranty
(1) year from the date of the original purchase. If this monitoring system fails to function properly when used as directed under normal conditions within the one-year period, Angelcare ®...
Need help?
Do you have a question about the AC1100 and is the answer not in the manual?
Questions and answers