Advanced Network Setup - Toshiba 55XL700A Owner's Manual

Item
Security Key Security Key set
AP MAC The AP's MAC address is displayed
Address when the TV is connected with the AP�
USB MAC The MAC address of the USB (Dual
Address Band WLAN Adaptor) is displayed�
DHCP
Enabled is displayed when using
DHCP�
Disabled is displayed when not using
DHCP�
IP Address The TV's IP address
Subnet Mask Value of the Subnet Mask
Default Gateway Address of the Default GATEWAY
DNS Address of the DNS
Note:
Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value
might be low. It is recommended that Encryption
be changed to AES.
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or
IEEE 802.11n on 5 GHz for audio and SD video
streaming.
• It is recommended to use IEEE 802.11n on 5 GHz
for HD video streaming.
• It is recommended that the encoding rate for
streaming video content is 20 Mps or less.
• It is not recommended to use 2.4 GHz for audio
and video streaming.
• Content playback may be interrupted by various
surrounding interference.

Advanced Network Setup

Notes:
• When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On or
Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off,
set Auto Setup to Off, and set the IP Address
manually.
IP Address Setup
Auto Setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press �
Connecting your TV
Description
�
Network Setup
Network Type
Wireless Setup
Advanced Network Setup
3
Press s or r to select IP Address Setup , and
press �
Advanced Network Setup
IP Address Setup
DNS Setup
MAC Address
4
Select Auto Setup , and then press v or w to select
On �
IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway
Note:
Other items will be greyed out when Auto Setup is
set to On.
Manual Setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press �
3
Press s or r to select IP Address Setup , and
press �
4
Select Auto Setup , and then press v or w to select
Off �
5
Press s or r to select IP Address �
6
Press v or w to select the field you want to change,
and then use the number buttons to input the IP
address� To save the setting, press
Note:
IP address field numbers must be between 0
and 255. After each field number has been set,
press to store the entire address. If the entire
IP Address is invalid, a warning message will
appear after is pressed.
7
Press s or r to select Subnet Mask , and edit in the
same way as IP Address�
8
Press s or r to select Default Gateway , and edit
in same way as IP Address �
Note:
If you manually set the IP address, you must not use
the same IP address for any other device. The IP
address you use should be a private address.
Wired
Wired
On
. . .
. . .
. . .
�
�
51