Advanced Network Setup - Toshiba WL9*8 Series User Manual

CONTROLS AND FEATURES
Item
Status Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the TV is
not connected with the AP.
Signal Connection signal strength with AP
(STRONG/MEDIUM/WEAK)
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC The AP's MAC address is displayed when
Address the TV is connected with the AP.
TV MAC The MAC address of the TV(Wireless) is
Address displayed.
DHCP Enabled is displayed when using DHCP.
Disabled is displayed when not using
DHCP.
IP Address The TV's IP address
Subnet Mask Value of the Subnet Mask
Default Address of the Default GATEWAY
Gateway
DNS Address of the DNS
NOTE: Even if an AP for IEEE 802.11n is used when Encryption
is set to WEP or TKIP, the Speed value might be low. It is
recommended that Encryption be changed to AES (see
"Manual Setup" on page 45).
Notes on wireless LAN environment
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various
surrounding interference.
Description

Advanced Network Setup

NOTE:
• When the DHCP function of the router connected with this
TV is On, you can set Auto Setup to On or Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off, set Auto Setup
to Off, and set the IP Address manually.
IP Address Setup
Auto Setup
a
In the Preferences menu, press
Network Setup and press OK.
b
B b
Press or to select Advanced Network Setup
and press OK.
Network Setup
Connection Type
Wireless Setup
Advanced Network Setup
c
B b
Press or to select IP Address Setup and press
OK.
Advanced Network Setup
IP Address Setup
DNS Setup
MAC Address
d
Highlight Auto Setup and press
IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway
NOTE: Other items will be grayed out when Auto Setup is set
to On.
Manual Setup
a
In the Preferences menu, press
Network Setup and press OK.
b
B b
Press or to select Advanced Network Setup and
press OK.
c
B b
Press or to select IP Address Setup and press
OK.
46
B b
or to select
Wired
C c
or to select On.
On
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
. . .
B b
or to select