Headphone Settings - Toshiba 55XL700A Owner's Manual

3
Press v or w to select Stand or Wall depending on
how your TV is installed, and then press the RED
button�
4
Press v or w to select the frequency range you want
to adjust from the equalizer window, and then press s
or r to adjust the level�
Sound Navigation
TV Mounting
+20
0
-20
100 330
2 1
5
Repeat step 5 for other frequencies�
Using the Advanced Sound Settings
Surround and Dynamic Bass Boost help to create an
enhanced surround sound experience with deep, rich bass
from stereo sound sources� Your TV's audio will sound
fuller, richer, and wider�
Voice Enhancement helps to emphasize dialogue. It
will be easier to hear voices over other background audio�
1
From the Advanced Sound Settings , press s or
r to select Surround �
2
Press v or w to select Off , Spatial or Cinema �
Voice Enhancement : To turn the vocal emphasis
Dynamic Bass Boost :
or Ext. Woofer
Note:
Ext. Woofer is displayed instead of Dynamic Bass
Boost when Woofer is set to External in the AV
Connection menu ( - page 40).
Using Dolby Volume
This feature provides a consistent sound volume regardless
of programmes, channels or input sources�
1
From the SOUND menu, press s or r to select
Dolby Volume �
2
Press v or w to select Low , High or Off �
Notes:
• This feature does not affect the audio signal output
from the DIGITAL AUDIO OUT and MONITOR
output terminals.
• If you feel it is hard to listen to audio due to signal
status, turn off Dolby Volume.
Using the TV's features (General)
Stand
Equalizer
1K 3.3K 10K [Hz]
0 1 2 [Level]
effect On or Off �
To select the desired bass
expansion level ( Off , Low ,
or High )�
Adjusting Audio Level Offset
Sometimes there can be large changes in volume when
switching from a DTV 5�1ch to a DTV 2ch, an ATV
channel, or an external input� Using this feature reduces
these volume differences�
1
Set the volume level usually used when watching a
5�1ch programme�
2
Tune to a channel which is DTV 2ch, ATV or an
external input�
3
From the SOUND menu, press s or r to select
Audio Level Offset and press
4
Press s or r to select an option, and then press v or
w to adjust the volume level�
Audio Level Offset
DTV 2ch
ATV
External Input
Notes:
• The available item changes depending on the
current input source. For example, when watching
a DTV 2ch programme, only DTV 2ch is available
and the other two items are greyed out in the menu.
This allows you to easily adjust according to each
condition.
• When watching a DTV 5.1ch programme, this
feature is not available.

Headphone Settings

This setting is used to set the sound output when
headphones are connected�
Speaker Headphone
Link
On Sound is output
( 2 – + is available�)
Off Sound is output
(Headphone level
menu is available�)
1
From the SOUND menu, press s or r to select
Headphone Settings , and then press
2
Press s or r to select Speaker Link and then press
v or w to select On or Off �
3
If you select Off , next select Headphone Level , and
then press v or w to adjust the headphone sound�
Headphone Settings
Speaker Link
Headphone Level
�
-5
0
0
Speakers
No sound
Sound is output
( 2 – + is available�)
�
Off
50
27