Parental Setup
The Parental Control feature allows you to block
programmes according to their rating levels� If a PIN has
been set, you will need to enter it before adjusting the
level�
1
From the DTV Settings menu, press s to select
Parental Control �
Parental Control
Parental Setup
2
Press v or w to choose the desired Parental Setup
option�
• When the Country menu select Australia: None,
Block all, Block G and above, Block PG and
above, Block M and above, Block MA and
above, Block AV and above, Block R and
above�
• When the Country menu select New Zealand:
None, Block all, Block G and above, Block
PGR and above, Block AO and above�
To view blocked programmes, enter the PIN�
Using the System Information
This feature can be used to check the version of software
currently installed� When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc�
1
From the SETUP menu, press s or r until System
Information is selected�
2
Press
to display the System Information �
System Information
14.1.x.x Xxx xx 2010 - xx:xx:xx FW:xx
WEAK
Ch22
Ch25
Ch35
Ch46
38
Other Digital TV features and settings
None
TOSHIBA
2010
AVERAGE
STRONG
Poor
Good
Good
Good
Local Time Settings
• This feature is available when Country is set to
Australia ( - page 13)�
• This function allows you to manually set the time zone.
Please note that if you manually change the time zone
setting, all existing entries under Programme Timers will
become invalid as they are still based on the old time
zone. It is recommended that you delete all entries under
Programme Timers before proceeding with the steps
described below�
1
From the DTV Settings menu, press s or r to
select Local Time Setting �
2
, and then press s or r to select Time
Press
Zone �
3
Press v or w to select the item you want to set�
( New South Wales , Northern Territory ,
Queensland , South Australia , Tasmania ,
Victoria , Western Australia , Australian Capital
Territory )
Local Time Setting
Time Zone
Local Time
4
Press s to select Local Time , and then press v or
w to set as required�
Performing a Software Upgrade
TOSHIBA may offer upgrades for the TV's software in
the future� The TV's software is upgraded via the
Network�
Before downloading software;
Configure your TV to connect to the Internet.
Note:
While the upgrade is being performed, you will not
be able to watch the TV.
1
From the SETUP menu, press s or r until
Software Upgrade is selected, and then press
2
Network Upgrade is displayed� Press
Note:
If the network is not available, a warning
message will appear.
3
The TV software upgrade will start when the
download succeeds�
New South Wales
11:30
�
�