Toshiba 55XL700A Owner's Manual page 17

C. Colour System
A : Automatic, P : PAL , S : SECAM,
N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal, the
automatic colour system selection (A) may have
malfunctioned or the sound system selection is
wrong� In this case, select another colour and/or
sound system�
D. Position skip selection
Press s or r to turn the position skip option
on " 8 " or off " ( "�The position will then be
skipped when you select channels with P U or P u �
The " 8 " mark will appear beside the position
number in the banner when you use the Number
buttons on the remote control to tune directly�
E. Channel search operation
Press r to search up the band or s to search down
the band�
Press s or r repeatedly until your desired channel
is displayed�
When a station is found, it will be displayed�
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING�
F. Manual Fine Tuning
Press s or r until better picture and sound are
obtained�
G. Label
Station labels appear beside the position display
each time you turn on the TV, select a channel, or
press k �
To change or create station labels:
1) Press s or r repeatedly to select a character for
the first space, then press w �
2) Repeat step 1) to enter the rest of the characters�
If you would like a blank space in the label
name, you must choose a blank space from the
list of characters�
Press to store your settings�
Sorting positions
- analogue -
ATV channels may be moved and stored to the position of
your choice�
1
From the SETUP menu, press s or r to select ATV
Manual Tuning �
2
With the list of channels now showing, press s or r
to select the channel you want to move and press w �
Getting started
3
4
DTV Manual Tuning
This feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known�
1
2
*(blank space)
3
ATV Manual Tuning
Pos. Label
ABCD
1
2 EFGH
IJKL
3
4
MNOP
5
6
7
8
Use s or r to move through the list to your preferred
position� As you do so, the other channels will move
to make room�
Press v to store your move�
Repeat as necessary, and then press
- digital -
From the SETUP menu, press s or r to select DTV
Manual Tuning , and then press
DTV Manual Tuning
WEAK
Signal Strength
Quality GOOD
Channel
Bandwidth
Start Scan
Enter the multiplex number using the number buttons
or use v or w to adjust the number up or down�
Press s to select Bandwidth , press v or w to select
7MHz , 8MHz or 7MHz and 8MHz ( - page 65 )�
Then press s to select Start Scan , and press
The TV will start to search for that multiplex�
DTV Manual Tuning
0 New Channels - Total 6
New Pos. Name
2
20
21
22
23
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information will be updated�
Repeat as necessary� Press
�
EXIT
�
AVERAGE STRONG
22
XXX.X MHz
7MHz
Type
to finish.
EXIT
�
17