Setting The Colour System; Setting The External Input Skip - Toshiba 55XL700A Owner's Manual

2
Press �
TV (Digital TV or Analogue TV),
o 1 ( o (1), video 1 input) or o 1S (S-video input),
o 2 ( o (2), video 2 input),
o 3 ( o (3), component video input),
o 4 ( o (4), component video input),
HDMI 1, HDMI 2, HDMI 3, HDMI 4 (HDMI input),
PC ( o RGB/PC, PC input)
Notes:
• When component video, PC, or HDMI input modes
are selected, the MONITOR terminals (- page 40)
output audio signal only.
• If a REGZA-LINK device is connected to an HDMI
input, the REGZA-LINK icon will appear.
• When the TV is switched on, it will take a few
minutes for the REGZA-LINK icon to appear in the
list; when an HDMI cable is removed, it will take a
few minutes for the icon to disappear.
• If the HDMI cable from a connected device or an
HDMI setting for a connected device is changed,
Enable REGZA-LINK in the REGZA-LINK menu
may need to be reset to On.

Setting the Colour System

1
Press , and then press v or w to display the
MENU
SETUP menu�
SETUP
Menu Language
Country
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Colour System
Quick Setup
2
Press s or r to select Colour System , and then
press v or w to select Auto , PAL , SECAM , NTSC
4.43 or NTSC 3.58 �
3
Press to store your settings�
Notes:
• Confirm that colour system is set to "Auto" . If not,
select "Auto" with s or r.
• This feature is available in Standard video
(composite) inputs mode.
Using the TV's features (General)
English
Australia
Antenna
Auto

Setting the external input skip

This feature is designed to make input selection more
convenient�
1
From the PREFERENCES menu, press s or r
until AV Connection is selected, and then press
PREFERENCES
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Network Lock
Panel Lock
Display Settings
AV Connection
2
Press s or r to select Input Labeling , and then
press �
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
Woofer
Digital Audio Output
3
Press s or r to select the input you want to skip, and
then press the RED button to turn on the skip�
Input Labeling
Input Label
EXT 1
EXT 2
EXT 3
EXT 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
4
To turn off the skip, press the RED button again�
The input set to Skip is greyed out in the Input
Selection window and is skipped over when you press
on the remote control�
Auto
Off
PC
Digital
Internal
PCM
--
--
--
--
--
--
--
--
--
�
31