PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Network Lock
Panel Lock
Display Settings
2
, and then press s or r to select Auto
Press
Format
3
Press v or w to select On or Off �
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analogue -
Auto mode
The MTS Auto mode automatically recognizes stereo/
bilingual programmes depending on the broadcast signal�
1
Press
, and then press v or w to display the
MENU
SOUND menu�
SOUND
MTS
Dual
Balance
Advanced Sound Settings
Dolby Volume
Dynamic Range Control
Audio Level Offset
Headphone Settings
2
Press s or r to select MTS , and then press v or w
to select Auto or Mono �
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the MTS mode to Mono �
Noise will be reduced and reception may improve�
Note:
If you experience noise with a particular programme
whose channel reception is usually good, try setting
MTS mode to Auto, and then switch b to e
Mono (monaural).
Selecting Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound, when bilingual
programmes are received�
1
From the SOUND menu, press s or r to select Dual �
2
Press v or w to select Dual 1 or Dual 2 �
26
Using the TV's features (General)
Auto
Off
Auto
Off
Auto
Dual 1
0
Low
Off
Notes:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status is stored even when
the TV is turned off.
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds� If
the broadcast is not in stereo, the word Mono will appear�
Stereo ... Press b to select Stereo or Mono �
Bilingual ... Bilingual transmissions are rare� If they
are transmitted, the word Dual will display� Choose the
desired channel number, and if the word Dual appears,
press b to select Dual 1 , Dual 2 , Mono (NICAM) or
Dual 1 or Dual 2 (German stereo/bilingual broadcast)�
For DTV programmes
For stereo or dual mono broadcasts, press b , and then
use v or w to select settings�
Mode Display
d Stereo
j Dual mono
e Mono
Surround
Adjusting the sound Balance
1
From the SOUND menu, press s or r to select the
Balance �
2
Press v or w to adjust the settings as desired�
Adjusting the Sound Navigation
You can customize the sound mode settings. Select the
appropriate mode in accordance with the installation
location of the TV ( Stand or Wall ) and adjust the
equalizer on-screen as desired.
1
From the SOUND menu, press s or r to select
Advanced Sound Settings and then press
2
Press s or r to select Sound Navigation , and
then press
�
Advanced Sound Settings
Sound Navigation
Surround
Voice Enhancement
Dynamic Bass Boost
Pressing w
Stereo S Left S Right
Dual 1 S Dual 2 S Dual
—
—
Off
On
High
�