DNS Setup
When the DHCP function of the router connected to this
TV is Off, set Auto Setup to Off, and manually set the
DNS address(es)� Your internet service provider should
have provided these to you�
Auto setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press
�
3
Press s or r to select DNS Setup , and press
4
Select Auto Setup , and then press v or w to select
On �
Note:
Other items will be greyed out when Auto Setup is
set to On.
Manual setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press
�
3
Press s or r to select DNS Setup , and press
4
Select Auto Setup , and then press v or w to select
Off �
5
Press s or r to select Primary DNS Address �
6
Press v or w to select the field you want to change,
and then use the number buttons to input the Primary
DNS Address� To save the setting, press
Note:
DNS address field numbers must be between
0 and 255. If you input an incompatible number
and press
, the field number will reset to the
previous value.
7
Press s or r to select Secondary DNS Address ,
and edit in the same way as Primary DNS Address�
MAC Address
You can view the fixed MAC address for the TV and for
the Dual Band WLAN Adaptor, if one is installed�
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press
�
3
Press s or r to select MAC Address , and press
�
52
Connecting your TV
�
�
�
�
Network Connection Test
This function checks the Internet connectivity�
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Network Connection Test ,
and press
Note:
A message will appear to indicate if the
connection was successful or if it could not be
completed.
�
Note:
The result of Network Connection Test does not
always guarantee the connection. Depending on
the situation, YouTube may not be able to be used.
To cancel the Network Connection Test:
Press
while searching for the Internet connection�
RETURN
Setting the Network Lock
• This feature is available when you set PIN Setting in
the DTV Settings menu ( - page 37)�
• You can use the Network Lock feature to prevent the
Web browser from launching�
�
1
From the PREFERENCES menu, select Network
Lock and press
2
Enter your four-digit PIN code�
3
Press s or r to select On or Off �
Using the software keyboard
You can enter text by using the Software Keyboard� The
Software Keyboard window will appear when you press
on a field that accepts character input.
To enter text using the software keyboard:
1
Select the desired character on the on-screen software
keyboard�
2
Press
�
3
Repeat steps 1 and 2 until you have entered all desired
text�
4
Press the BLUE button to close the software keyboard
and return to the previous screen�
�
�
�