Toshiba 55XL700A Owner's Manual page 18

Sorting Channels
- digital -
The channel order may be changed to suit your personal
preference�
1
From the SETUP menu, press s or r to select DTV
Settings , and then press
2
Press s or r to select Channels , and then press
DTV Settings
Channels
PIN Setting
Parental Control
Local Time Setting
Standby Channel Update
Dynamic Scan
3
For your convenience, you can jump to specific places
in the list by one of the following methods�
Channels
Line No. 1/10
Pos. Name
1
2
7
30
40
51
822
823
Line Number Jump — Press the Number button
to input the line number you want to select, and then
press �
Station Letter Jump — Press
to the next station name with a different initial letter�
It is also possible to change the Position number of a
particular channel�
Renumber — Press the RED button to renumber for
the selected channel� Edit the channel number using
the Number buttons, and then press
Pos.
- - - -
Move — Press the GREEN button to activate
the Move feature� Press the s or r to select the
channel you wish to move and press
you wish to move multiple channels at once, select
another channel and check in the same way� Repeat as
necessary�
Once all desired channels have been checked, select
s or r to place the focus at the position to which
you wish to move the channels� The channels will
be inserted above the selected channels� Press the
GREEN button to execute the move�
18
Getting started
�
On
On
TV
or to jump
�
Name
to check� If
Channels
Line No. 1/10
Pos. Name
1
2
7
30
40
51
�
822
823
Sort — Press the YELLOW button. A confirmation
window will appear� Press v or w to select Yes , and
then press �
Sort
Your existing channel order will be lost. Do you wish to
continue?
The Sorting Type selection window will appear�
Sort
Sorting Type
Press v or w to set the sorting rule�
Channel Number mode:
Position No� order (numerical sequence)
A-Z Sort mode:
Station name order (A to Z)
Press s to select Sort , and then press
Setting the Standby Channel Update
If the Standby Channel Update is set to On , when the
TV is in standby mode, Digital Tuning is automatically
executed and any new channels are saved�
1
From the DTV Settings menu, and then press
2
Press s or r to select Standby Channel Update ,
and then press v or w to select On �
Selecting Dynamic Scan
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
" Broadcast information has changed. Would you
like to rescan now? "� Please follow the message� If
you do not wish for the TV to detect changes and prompt
you to rescan, you should set this feature to Off �
1
From the DTV Settings menu, press s or r to
select Dynamic Scan �
2
Press v or w to select On or Off �
TV
Yes
Channel Number
Sort
�
- digital -
- digital -
�