Note:
If the Dual Band WLAN Adaptor is not
connected, Wireless cannot be selected.
3
If you selected Wired , see "Advanced Network
Setup" on page 51�
Wireless Setup
Notes:
• This feature is greyed out when the Dual Band
WLAN Adaptor is not connected or Network Type
is set to Wired.
• Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected
while watching TV.
• Do not remove the Dual Band WLAN Adaptor
when Network Type is set to Wireless or wireless
communication is active.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used�
• WPS (Wi-Fi Protected Setup™) is an industry
standard designed to make connection of wireless
LAN equipment and security setup easy� WPS will
automatically configure all wireless settings.
Assisted Setup (setup by using the AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from the AP� You will
manually set the Security Key�
Manual Setup (manual input of all settings)
Easy Setup using PBC (Push Button
Configuration)
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Wireless Setup , and press
�
3
Press s or r to select Easy Setup , and press
Wireless Setup
Easy Setup
Assisted Setup
Manual Setup
4
Press v or w to select PBC �
5
Press s to select Start Scan , and press
6
Following the on-screen instructions, push the
appropriate button on your AP�
7
When a window reporting that the setup is complete
appears, press
�
Connecting your TV
�
On
�
To cancel searching for the AP:
Press
while searching for the AP� A message will
RETURN
appear, and then press v or w to select Yes and press
Easy Setup using PIN (Personal Identification
Number)
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Wireless Setup , and press
�
3
Press s or r to select Easy Setup , and press
4
Press v or w to select PIN �
5
Press s to select Start Scan , and press
6
Press s or r to select the desired AP and press
Note:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
7
When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup� When a message displays to
report that the setup is complete, press
To cancel searching for the AP:
Press
while searching for the AP� A message will
RETURN
appear, then press v or w to select Yes and press
Assisted Setup
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Wireless Setup , and press
�
3
Press s or r to select Assisted Setup , and press
�
Wireless Setup
Easy Setup
Assisted Setup
�
Manual Setup
4
Press s or r to select the desired AP and press
Note:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
5
Select Security Key and press
Keyboard window will appear�
6
Input the Security Key by using the Software
Keyboard ( - page 52)� To save your setting, press
the BLUE button�
�
�
�
�
On
� The Software
�
�
�
�
�
49