Labeling Video Input Sources; Amplifier Control; Speaker Preference; Using Regza-Link - Toshiba 55XL700A Owner's Manual

Labeling video input sources

These input labels are shown in the input selector� You
can label video inputs according to the devices you have
connected to the TV�
1
Select AV Connection from the
PREFERENCECES menu, and then press
2
Press s or r to select Input Labeling , and then
press �
Input Labeling
Input Label
EXT 1
EXT 2
EXT 3
EXT 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
3
Press s or r to select the item you want to label,
and then press v or w to select --, Amplifier , DVD ,
Game , PC , Recorder , Satellite or VCR , or press
the GREEN button to select User Input�
Note:
When User Input is selected by pressing the
GREEN button, the Software Keyboard window will
appear. Input the desired characters (10 characters
or less) by using the Software Keyboard (- page
52) or using the number buttons for number input.
To save your settings, press the BLUE button.
4
Repeat step 3 for other video inputs�

Using REGZA-LINK

This feature uses CEC (Consumer Electronics Controls)
technology and allows the control of Toshiba REGZA-
LINK compatible devices from the TV remote control via
HDMI connection ( - page 46)�
Note:
Not all Toshiba products currently support REGZA-
LINK.
REGZA-LINK Setup
1
From the PREFERENCES menu, press s or r to
select REGZA-LINK Setup �
2
Press , and then press s or r to select Enable
REGZA-LINK �
32
Using the TV's features (General)
�
--
--
--
--
--
--
--
--
--
REGZA-LINK Setup
Enable REGZA-LINK
TV Auto Power
Auto Standby

Amplifier Control

Speaker Preference

3
Press v or w to select On or Off �
Note:
If you set Enable REGZA-LINK to Off, all other
items will be greyed out.
4
Press s or r to select the REGZA-LINK Setup
item you want to use, and then press v or w to select
On/Off or the desired speakers mode�
• TV Auto Power: On/Off
• Auto Standby: On/Off
• Amplifier Control: On/Off
• Speaker Preference: TV Speakers/Amplifier
REGZA-LINK functions
When Enable REGZA-LINK is set to On , the following
functions can be enabled by setting them to On �
TV Auto Power
The TV Auto Power setting allows the TV to be
automatically switched on if a REGZA-LINK device is
turned on�
Auto Standby
If Auto Standby is enabled, the TV, when switched off,
will automatically switch off (put into standby mode) all
connected REGZA-LINK devices�
Amplifier Control
When Amplifier Control is set to On , it allows the
" Speaker Preference " feature to become available�
Speaker Preference
This feature allows the Speaker Preference to be set
to TV Speakers or Amplifier � The Amplifier option
allows the remote control to adjust or mute the volume of
the external audio�
Notes:
• When you turn on the amplifier, change its input
source, or adjust the sound volume, the sound
will be output from the amplifier's speakers even
if TV Speakers has been selected. Turn the TV to
standby and then on again to output the sound
from the TV speakers.
• The above functions are dependent on the
connected device and TV setting.
On
On
On
On
TV Speakers