Connecting An Hdmi Device; Connecting A Dvi Device; Connecting Hdmi And Dvi Devices - Toshiba 55XL700A Owner's Manual

Connecting HDMI and DVI devices

• When turning on your electronic components, turn on
the TV first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off
the HDMI or DVI device first, and then the TV.
• This TV may not be compatible with features and/or
specifications that may be added in the future.
• This TV is only operable with L-PCM on 32/44. 1/48
kHz and 16/20/24 bits. If there is no sound when using
HDMI, use the analogue audio cables to connect the TV
and the HDMI device and select Analogue for HDMI 3
Audio of the AV Connection menu ( - page 43)�
Connecting HDMI and DVI devices
The HDMI input on your TV can receive digital audio and
uncompressed digital video from an HDMI device and
uncompressed digital video from a DVI device�
This input is designed to accept HDCP programme
material in digital from CEA-861-D compliant consumer
electronic devices (such as a set top box and DVD player
with HDMI and DVI output)�
The HDMI input is designed for best performance with
1080i (50 Hz/60 Hz), 1080p (24Hz/50Hz/60Hz) high-
definition video signals, but will also accept and display
480i, 480p, 576i, 576p, 720p (50 Hz/60 Hz) and VGA
(VESA 640×480 @ 60/72/75 Hz) signals.
• HDMI : High-Definition Multimedia Interface
• DVI : Digital Video Interface
• HDCP : High-bandwidth Digital Content Protection
• CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth
digital content protection, which is being standardized
for reception of high-definition video signals. Because
this is an evolving technology, it is possible that some
devices may not operate properly with the TV�
• Acceptable PC signal format:
S-VGA: VESA 800 5 600 @ 56/60/72/75 Hz
XGA: VESA 1024 5 768 @ 60/70/75 Hz
W-XGA: VESA 1280 5 768 @ 60/75 Hz
W-XGA: VESA 1360 5 768 @ 60 Hz
S-XGA: VESA 1280 5 1024 @ 60/75 Hz
However, these signal formats are converted to match
the number of pixels of the LCD panel�
Therefore, the TV may not display small text properly�
• L-PCM : Linear-Pulse Code Modulation
42
Connecting your TV

Connecting an HDMI device

One HDMI cable (type A connector) is needed�
Right side of TV
HDMI device
For proper operation, it is recommended that you use a
short HDMI cable�
HDMI cable transfers both video and audio�
Note:
It is possible that some HDMI devices may not
operate properly with this TV.

Connecting a DVI device

One HDMI (type A connector) -to-DVI adapter cable and
analogue audio cables are needed�
(
1 ARC
DVI device
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 3m� The recommended
length is 2m�
1 1 ( ( ARC ARC ) )
VIDEO AUDIO
L R
IN
OUT
Back of TV
)
2 3
VIDEO AUDIO
L R
IN
OUT
Back of TV
2 2 3 3
HDMI OUT
Back of TV
PC/HDMI 3
(AUDIO)
DVI
OUT