Setting Up The Network; Wireless Setup - Toshiba 42SL417U Owner's Manual

Setting up the Network

You can select the Network Type.
1
> Settings > PREFERENCES > Network
Setup > .
O K
(Another:
2
Press B or b to highlight Network Type.
3
Press C or c to select Wired or Wireless.
4
If you select Wired, see "Advanced Network Setup"
(- p. 58).
If you select Wireless, see the next section.

Wireless Setup

Note:
• Continued AP (Access Point) connection is not
guaranteed. Connection may be lost while watching TV.
There are 3 methods for wireless setup:
•Easy Setup (WPS)
If the AP supports WPS, this can be used.
– WPS is a standard designed to simplify the
connection of wireless LAN equipment and the setup
of network security features.
•Assisted Setup (setup using the AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from the AP. You need
to manually set the Security Key.
•Manual Setup (to input all settings)
Easy Setup using PBC (Push Button Configuration)
1
> Settings > PREFERENCES > Network
Setup > .
O K
2
Press B or b to select Wireless Setup. Press
3
Press B or b to select Easy Setup. Press
4
Press C or c to select PBC.
5
Press b to select Start Scan. Press
6
Following the onscreen instructions, push the
appropriate button on your AP.
7
When a screen reporting that the setup has
succeeded appears, press
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Press C or c to select Yes. Press
56
Downloaded from www.Manualslib.com
Chapter 8: Advanced features
> Network > Network Setup >
.
O K
.
O K
.
O K
manuals search engine
Easy Setup using a PIN (Personal Identification
Number)
1
> Settings > PREFERENCES > Network
Setup >
2
Press B or b to select Wireless Setup. Press
3
Press B or b to select Easy Setup. Press
.)
OK
4
Press C or c to select PIN.
5
Press b to select Start Scan. Press
6
Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7
Press B or b to select the desired AP. Press
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
8
When a screen reporting that the setup has
succeeded appears, press
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Press C or c to select Yes. Press
Assisted Setup
1
> Settings > PREFERENCES > Network
Setup >
2
Press B or b to select Wireless Setup. Press
3
Press B or b to select Assisted Setup. Press
4
Press B or b to select the desired AP. Press
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
5
Select Security Key. Press
Keyboard appears.
6
Input the Security Key using the Software Keyboard
(- p. 59). To save your settings, press the BLUE
button.
.
OK
Note: The Security Key must adhere to these
.
O K
conditions:
-TKIP/AES: 8-63 ASCII or 64 Hex characters
-WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7
Select Done. Press
Note: Settings are not saved if
Done is selected.
.
OK
.
OK
.
OK
. The Software
O K
.
O K
is pressed before
.
O K
.
O K
.
OK
.
O K
.
OK
.
O K
.
O K
.
O K