Table of Contents
Advertisement
Connecting an HDMI
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI
source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital- Content Protection) programme material
in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or
DVD player with HDMI or DVI output). For acceptable video signal formats, see page 16.
NOTE:
•
Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption
of a new standard.
•
Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo (
•
HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see
illustration).
Model 19/22
HDMI device
®
or DVI device to the HDMI input
To connect an HDMI device
1
2
11
HDMI out
SETTING UP
).
HDMI
cable
(not supplied)
Advertisement
Table of Contents
