Connecting Your Tv; Back Connections - Toshiba 47VL800A Owner's Manual

• Most of the picture/sound controls and functions are
available in both digital and analogue modes� However,
features not available will be greyed out�

Back connections

Connection example
Back and
left side of TV
LAN
VIDEO RGB/PC
(AUDIO)
HDMI 3
VCR (Normal)
• Before connecting any external equipment, turn off all
main power switches�
• The unauthorized recording of TV programmes, DVDs,
video tapes and other materials may infringe upon the
provisions of copyright law�
• o (1) connection: Use for the A/V adaptor cable
(supplied) (22-pins: black/3-pins: yellow, white and
red)�
• o (2) connection: Use for the component adaptor cable
(supplied) (1-pin: light green/3-pins: green, blue and
red)�
The audio terminals are shared with the o (3)�
• o (3) connection: Use for the A/V adaptor cable
(supplied) (1-pin: yellow/3-pins: yellow, white and red)�
Selecting Side Shared Audio
You can select the Side Shared Audio external input
terminals located on the left side of TV o (2) and o (3)�
1
From AV Connection in the Preferences menu,
press s or r select Side Shared Audio �
2
Press v or w to select EXT 2 or EXT 3 �
Connecting an audio system
You can enjoy high quality dynamic sound by connecting
the TV to an audio system�

Connecting your TV

Notes:
• DO NOT connect the DIGITAL AUDIO output
• Connect the DIGITAL AUDIO output terminal to the
• Refer to the owner's manual of the connected
• When you connect the TV to other equipment, be
• The output sound of the TV has a wide dynamic
DVD video player
(with component
video outputs)
or
• Turn off the amplifier before you connect or
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Set Top Box
Dolby Digital decoding function, be sure to set PCM
for Digital Output menu ( - page 46). Otherwise,
the speakers and your hearing may be damaged by
sudden high volume audio.
Connecting an amplifier equipped with a
Dolby Digital decoder
You can enjoy dynamic realistic sound by connecting the
TV to an amplifier equipped with a Dolby Digital decoder
- digital -
or Dolby Digital processor� When using this setup, select
Auto in the Digital Output menu�
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
OPTICAL input of a receiver or processor.
equipment as well.
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
range. Be sure to adjust the audio amplifier's
volume to a moderate listening level before turning
on the power. Otherwise, the speakers and your
hearing may be damaged by sudden high volume
audio.
disconnect the TV's power cord. If you leave the
amplifier power on, the speakers may be damaged.
left side of TV
To Digital Audio
output terminal
Front speaker Surround speaker
Centre speaker
Amplifier equipped with
Dolby Digital decoder
To Optical type
digital audio input
Optical digital cable
(not supplied)
Sub woofer
Signal flow
47