Using Your Home Network - Toshiba 47VL800A Owner's Manual

• If you connect the TV and PC directly, use a
crossover LAN cable.
To connect the TV to a home network -
Wired
Modem (if available)
[1]
Cable or
Phone jack
[1] Coaxial or telephone cable (depending on your modem
type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV's
LAN port�
To connect the TV to a home network -
Wireless
Please refer to "Wireless Setup" section�
Access point (AP)
Wireless LAN router
Modem
PC
Connecting your TV
TV back view
LAN
Router with Hub
[2]
Server PC
[2]
Left side view
TOSHIBA Dual Band
WLAN adaptor
(not supplied)

Using your home network

This TV is a DLNA CERTIFIED™ Player and Renderer�
This TV can play digital content stored on a DLNA
CERTIFIED™ product with server function�
If you want to use this TV as a DLNA CERTIFIED™
Player or Renderer, you will have to configure the network
on your TV�
If you want to use your home network, you will have to
configure the network on your TV.
Change the network settings if necessary�
When using a wireless home network:
Wireless Interoperability
The TOSHIBA Dual Band WLAN Adaptor is designed
to be interoperable with any wireless LAN product that
is based on Direct Sequence Spread Spectrum (DSSS)/
[2][3]
Orthogonal Frequency Division Multiplexing (OFDM)
radio technology, and is compliant to:
• The IEEE 802.11 Standard on Wireless LANs (Revision
a/b/g/n), as defined and approved by the Institute of
Electrical and Electronics Engineers�
• The TOSHIBA Dual Band WLAN Adaptor is intended
for use this TV and should not be used with any other
devices�
Use of the WLAN Adaptor in other USB products may
result in damage to the WLAN Adaptor and or the
equipment� Such use will void any warranty that may
otherwise apply, and TOSHIBA will have no liability for
any damage that may result from such use�
CAUTION:
• Bluetooth™ and Wireless LAN devices operate
within the same radio frequency range and may
interfere with one another. If you use Bluetooth™
and Wireless LAN devices simultaneously, you
may occasionally experience a less than optimal
network performance or even lose your network
connection.
• If you should experience any such problem,
immediately turn off either your Bluetooth™ or
Wireless LAN device.
• Actual performance can vary, including lower
wireless network capacity, data throughput rate,
range and coverage.
• Performance depends on many factors, conditions
and variables, including distance from the access
point, volume of network traffic, building materials
and construction, operating system used, mix of
wireless products used, interference and other
adverse conditions.
55