Connecting Your Tv; Back Connections - Toshiba 24PS10E Owner's Manual

Back connections

Connection example
DVD video player
(with component
video outputs)
TV back view
DIGITAL
AUDIO
1 2
(2) COMPONENT / VIDEO INPUT
R AUDIO L /MONO P /C P
R R
R AUDIO
AUDIO ( FIXED )
VCR (Normal)
Audio system
• Before connecting any external equipment,
turn off all main power switches.
• The unauthorized recording of TV
programmes, DVDs, video tapes and other
materials may infringe upon the provisions of
copyright law.
• The COMPONENT VIDEO INPUT consists of
three component video signals (Y, P
C
) and provides the best picture performance.
R
These terminals can only be used with the
component video compatible equipment e.g.
DVD video player, etc.
• If you connect to COMPONENT VIDEO for
the COMPONENT / VIDEO INPUT terminals,
screen display will appear changes to
COMPONENT.
• Additional equipment and cables shown are
not supplied with this TV.
Note:
o(2) COMPONENT / VIDEO INPUT terminals
Standard video mode:
Use terminals Y, L and R.

Connecting your TV

or
Set Top Box
PC/HDMI 1
RGB/PC
( AUDIO )
/C Y
B B
VIDEO
L /MONO VIDEO
(1)
/C
B B
Component video mode:
Use terminals Y, P
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
Notes:
• DO NOT connect the DIGITAL AUDIO output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the DIGITAL AUDIO output terminal
to the OPTICAL input of a receiver or
processor.
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the TV to other equipment,
be sure to turn off the power and unplug all
of the equipment from the wall outlet before
making any connections.
• The output sound of the TV has a wide
dynamic range. Be sure to adjust the audio
amplifier's volume to a moderate listening level
, P /
R
before turning on the power. Otherwise, the
speakers and your hearing may be damaged
by sudden high volume audio.
• Turn off the amplifier before you connect or
disconnect the TV's power cord. If you leave
the amplifier power on, the speakers may be
damaged.
Warning:
When you are connecting (via the DIGITAL
AUDIO output terminal) an AV decoder that does
not have Dolby Digital decoding function, be sure
to set PCM for Digital Output menu (- page 19).
Otherwise, the speakers and your hearing may
be damaged by sudden high volume audio.
(2) COMPONENT / VIDEO INPUT
R AUDIO L /MONO P /C P /C Y
R R B B
Red White Yellow
/C , P /C , L and R.
B B R R
(2) COMPONENT / VIDEO INPUT
R AUDIO L /MONO P /C P /C Y
R R B B
Red White Red Blue Green
(Audio)
VIDEO
VIDEO
23