Headphone Level - Toshiba 47VL800A Owner's Manual

Sound Navigation
TV Mounting
Equalizer
+20
0
-20
100 330
0 0
5
Repeat step 4 for other frequencies�
6
Press EXIT to confirm your adjustments
To cancel the selection or adjustment, select Cancel
on the screen and press OK �
To revert selections and adjustments to the factory
settings, select Reset on the screen and press OK �
Using the Advanced Sound Settings
Surround and Dynamic Bass Boost help to create an
enhanced surround sound experience with deep, rich bass
from stereo sound sources. Your TV's audio will sound
fuller, richer, and wider�
Voice Enhancement helps to emphasize dialogue� It
will be easier to hear voices over other background audio�
1
From the Advanced Sound Settings , press s or
r to select Surround �
2
Press v or w to select Off , Spatial or Cinema �
Voice Enhancement : To turn the vocal emphasis
Dynamic Bass Boost : To select the desired bass
Using Dolby Volume
This feature provides a consistent sound volume regardless
of programmes, channels or input sources�
1
From the Sound menu, press s or r to select
Dolby Volume �
2
Press v or w to select Low , High or Off �
Notes:
• This feature does not affect the audio signal output
from the DIGITAL AUDIO OUT terminal.
• If you feel it is hard to listen to audio due to signal
status, turn off Dolby Volume.
• This feature will automatically switch Off when
Dynamic Range Control is set to On or Digital
Audio Output is set to Auto.
Using the TV's features (General)
Stand
Cancel
Reset
1K 3.3K 10K [Hz]
0 0 0 [Level]
effect On or Off �
expansion level ( Off , Low ,
or High )�
Adjusting Audio Level Offset
Sometimes there can be large changes in volume when
switching from a DTV 5�1ch to a DTV 2ch, an ATV
channel, or an external input� Using this feature reduces
these volume differences�
1
Set the volume level usually used when watching a
5�1ch programme�
2
Tune to a channel which is DTV 2ch, ATV or an
external input�
3
From the Sound menu, press s or r to select
Audio Level Offset and press OK �
4
Press s or r to select an option and press v or w to
adjust the volume level�
Audio Level Offset
DTV 2ch
ATV
External Input
Notes:
• The available item changes depending on the
current input source. For example, when watching
a DTV 2ch programme, only DTV 2ch is available
and the other two items are greyed out in the menu.
This allows you to easily adjust according to each
condition.
• When watching a DTV 5.1ch programme, this
feature is not available.
Headphone Settings
This setting is used to set the sound output when
headphones are connected�
Speaker Headphone
Link
On Sound is output
( 2 – + is available�)
Off Sound is output

(Headphone level

menu is available�)
1
From the Sound menu, press s or r to select
Headphone Settings and press OK �
2
Press s or r to select Speaker Link and press v
or w to select On or Off �
3
If you select Off , next select Headphone Level and
press v or w to adjust the headphone sound�
Headphone Settings
Speaker Link
Headphone Level
-5
0
0
Speakers
No sound
Sound is output
( 2 – + is available�)
Off
50
29