Motion Detection Range; Colour Decoding; Resetting The Advanced Picture Settings; Expert Picture Settings - Toshiba 47VL800A Owner's Manual

Notes:
• This feature may not work properly depending on
the content.
• Adjustable range varies according to the Picture
Mode you set.
• Noise may appear on the image depending on the
device connected to the TV (e.g. a device with a
specific enhancer function).

Motion Detection Range

This feature is to set the range of the adjustment of
movement in the double-scan processing� If you feel
uncomfortable in motion picture, select Standard �
1
From the Advanced Picture Settings menu, press
s or r to select Motion Detection Range �
2
Press v or w to select Wide or Standard �
Wide: double-scan effect for higher-speed motion
picture
Standard: stabilized double-scan effect

Resetting the advanced picture settings

This feature allows you to reset the current Advanced
Picture Settings to the default values�
1
From the Advanced Picture Settings menu, press
s or r until Reset is selected �
2
Press OK �

Expert Picture Settings

Test Pattern
When the Test Pattern is displayed on the screen,
you can navigate to other Picture submenus without
removing the image� This allows the test pattern to be used
as a reference when making picture setting adjustments�
When you move to a non-Picture menu, or close the
menu, normal video will be restored�
1
From the Picture menu, s or r until Expert
Picture Settings is selected and press OK �
2
Press s or r to select Test Pattern �
3
Press v or w to select On or Off �
RGB Filter
This feature individually enables or disables the red, green
and blue components of the picture to allow for more
accurate adjustment of each colour�
26
Using the TV's features (General)
1
2
3
Note:
It is not possible to turn off all of these colours
simultaneously.

Colour Decoding

If you watch DVDs with this TV, the Colour Decoding
option may be set for ensuring the colourimetry
reproduction�
1
2
Note:
Normally set this feature to Auto (BT.611 and
BT.719 modes changes for the better colourimetry.
When receiving a normal signal and selecting
BT.611 and BT.719 modes, it may not be displayed
of correct colourimetry on the screen).
White Balance - Window Display
This feature displays a window pattern that allows you to
adjust the White Balance using a measuring device�
1
2
White Balance - Setting Type
You can choose the method for adjusting the White
Balance settings�
1
2
When 2P is selected:
1
2
3
From the Expert Picture Settings menu, press s
or r to select RGB Filter and press OK �
Press s or r to select Red , Green or Blue and
press v or w to select On �
Press s or r to select Colour or Tint and press v
or w to adjust the settings as desired�
From the Expert Picture Settings menu, press s
or r to select Colour Decoding �
Press v or w to select Auto , BT.709 or BT.601 �
From the Expert Picture Settings menu, press s
or r to select White Balance and press OK �
Press s or r to select Window Display and press
v or w to select On or Off �
From the Expert Picture Settings menu, press s
or r to select White Balance and press OK �
Press s or r to select Setting Type and press v or
w to select 2P or 10P �
Press s to select 2P White Balance �
Press s or r to select Red-Offset , Green-Offset ,
Blue-Offset , Red-Gain , Green-Gain or Blue-
Gain
Press v or w to adjust the settings as desired�