On Timer
Enable On Timer
Enable DTV Clock
Power On Time
Repeat
Input
Channel
Volume
Time until Power On
3
Press s to select Enable DTV Clock and press v
or w to select On or Off �
4
Press s or r to go through the list adding the details
of the on timer by using the number buttons and v or
w to make selections�
Power On Time (only when DTV Clock set to On):
Set the time you prefer with the number buttons�
Repeat (only when DTV Clock set to On): Select the
desired on timer operation ( Once , Every Day , Mon-
Fri , Mon-Sat , Sat-Sun )�
Input : Select a video input source (ATV, DTV, EXT 1,
EXT 2, EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4
or PC)�
Channel : Set the channel that will be tuned when the
TV turns on�
Note:
When an external input is selected in the Input
field, this feature cannot be selected.
Volume : Select the volume level that will be set when
the TV turns on�
Time until Power On (only for DTV Clock Off
mode): Set the amount of time from now until the TV
turns on using the Number buttons (maximum of 12
hours)�
5
When all the details have been entered, select Done
and press OK to start the timer�
To cancel the On Timer
1
From the On Timer menu, select Enable On Timer �
2
Press v or w to select Off and press s or r to select
Done , and press OK �
Setting the Sleep Timer
The Sleep Timer is especially useful if you want the TV to
turn itself off after a selected period of time�
1
From the Function menu, press s or r to select
Sleep Timer �
2
Press the Number buttons (0-9) to enter the amount
of time until the TV turns off� Alternatively, press v
or w to adjust the time in blocks of 10 minutes up to
12 hours�
36
Using the TV's features (General)
On
On
00:00
Once
DTV
30
00:00
Done
3
Press EXIT to start the timer�
To cancel the sleep timer:
Press s or r until the time is set to 00:00�
Resetting the TV
Reset TV will reset all TV settings, including stored
channels, to their original factory values�
1
From the System Setup menu, press s or r until
Reset TV is selected�
System Setup
DTV Manual Tuning
DTV Settings
Quick Setup
Location
Software Upgrade
Software Licences
System Information
Reset TV
2
Press OK to select�
A screen will appear warning that all settings will be
lost� Select Yes and press OK to continue�
When the set powers back on, the Menu Language
screen will appear ( - page 13)� Press OK to continue
and proceed to the Auto Tuning menu ( - page 17)�
If PIN code has been set, the PIN Settings screen will
appear ( - page 44)� Only 3D PIN code has been set,
the 3D PIN will appear ( - page 34)�
Channel List
1
Press the LIST button� The Channel List will appear�
Channel List
All Channels
2
Press s or r to select a channel or input and press
OK to watch�
In DTV mode, press v or w to select Favourites 1-4�
The number of favourites available depends on how
many favourite lists have been created�
English
Antenna
Home
6
9
11
31
34
36
48