Connecting Your Tv; Connecting External Equipment - Toshiba REGZA ANALOGUE Series Manual

CONNECTING YOUR TV

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
HDMI™ INPUT SOCKETS
COMPONENT VIDEO INPUT (EXT3)
SCART 2 (EXT2)
SCART 1 (EXT1)
*a decoder could
be Digital Satellite or
any other compatible
decoder.
Antenna/Cable
decoder*
media recorder
Aerial cables: - - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect the
media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto tuning, put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 38.
NOTE:
• The SCART socket does not output video/audio signals in
Photo Viewer mode.
• Although this television is able to connect to HDMI
equipment it is possible that some equipment may not
operate correctly.
Illustration represents 40LV655P.
FIXING STRAP
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owners manuals for all additional equipment must be
referred to for exact instructions.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
o
press to select between EXT1, EXT2, EXT3, EXT4, HDMI1,
HDMI2, HDMI3 or PC.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
8
POWER switch
(LV6**P and RV6**P
Series only)