Related Manuals for Toshiba 47VL800A
Summary of Contents for Toshiba 47VL800A
-
Page 1: Integrated Digital Lcd Tv
WNER'S ANUAL Integrated Digital LCD TV ® Owner's Record TOSHIB 47VL800A © TOSHIBA CORPORATION, 2011 VX1A00213200 TD/J1 All Rights Reserved... -
Page 2: Table Of Contents
Welcome to Toshiba Setting the Colour System �������������������37 Setting the external input skip �������������37 • Thank you for purchasing this Toshiba LCD Colour TV. Labeling video input sources ���������������38 This manual will help you use the exciting features of your new TV�... -
Page 3: Introduction
Introduction Attach the TV to the stand with the 3) Never stand or climb on the TV. mounting screw provided, or secure the TV • Educate children about the dangers of to the level surface using the strap if fitted, climbing on furniture to reach the TV or its or to a wall using a sturdy tie to the clip controls. - Page 4 Introduction 7) Never place the TV near a heater or in 11) Precautions for installing on outdoor aerial direct sunlight. An outside aerial system should not be The surface of the cabinet or power cord may located in the vicinity of overhead power lines, melt and result in a fire or an electric shock.
- Page 5 Introduction These items may cause a fire or an electric shock. If these objects are inserted inside the TV, turn off the TV and remove the power plug from the outlet immediately and contact a service technician. Be especially careful that children do not insert objects in the TV.
-
Page 6: Important Information
Exemptions cloth. • Toshiba is not liable for any damage caused by fires, This dust may cause a fire due to reduced natural disaster (such as thunder, earthquake, etc�), acts insulation on the plug. -
Page 7: Trademark Information
Introduction Trademark Information WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL • Manufactured under license from Dolby Laboratories. ACTIVITY AND/OR WAS OBTAINED FROM A Dolby and the double-D symbol are trademarks of VIDEO PROVIDER LICENSED TO PROVIDE AVC Dolby Laboratories�... -
Page 8: Getting Started
• Never mix battery types or combine used batteries Your Toshiba dealer or service personnel can best advise with new ones. you on which aerial to use in your area� Before connecting the aerial cable, turn off all main power Notes: switches�... -
Page 9: Tv Panel Controls
Getting started TV panel controls • You can operate your TV using the Touch Keys on the front of the panel or the remote control. The back and side of the panel provide the terminal connections to connect other equipment to your TV ( - “Connecting your TV” pages 47 – 71)� •... - Page 10 (photo, movies, music) ( - page 65)� RGB/PC and PC/HDMI3 (AUDIO) (input Note: terminal) Port 2: When using TOSHIBA Dual Band WLAN RGB/PC — For use when connecting a personal Adaptor. computer (PC) ( - page 50) (2) (video 2 input terminals) — High- PC/HDMI 3 (AUDIO) (input terminal) —...
-
Page 11: Initial/Index
Getting started Learning about the remote control Location of controls To access “TOSHIBA PLACES” Top Page Power on/Standby To select TV mode Input source selection To display the channel list To access the Quick Menu This button is not available... - Page 12 Getting started Location of controls for REGZA-LINK To select input from external source To change volume of AV amplifier To operate menu To exit menu To return to previous menu accessed Pr ess to STOP Pr ess to PLAY Pr ess PAUSE Press to SKIP BACK...
-
Page 13: Turning The Tv On
Getting started Turning the TV on Press OK , to display the Time Zone menu and press v or w to select the item you want to set� (New South Wales, Northern Territory, Queensland, South Switching on the TV Australia, Tasmania, Victoria, Western Australia or Connect the power cord to a wall outlet�... -
Page 14: 10 Select S Or R To Move Through The List To Select A
Getting started Quick menu item example Auto Tuning DTV Services Found : 7 ATV Services Found : 12 Mode Quick menu item Description Type Pos. Name Picture Mode - page 23� Picture Size - page 22� 3D Settings - page 33, 35� Personal Mode - page 54�... -
Page 15: Quick Menu
Getting started Mode Quick menu item Description Mode Quick menu item Description Sort Picture - page 68� - page 24� When using Repeat Sound - page 67� - page 28� Media Player Device Information - page 68� Personal Mode - page 54� (Movie List) When using Wireless Information - page 58�... -
Page 16: Menu Structure
Movie Jump to Movie menu Music Jump to Music menu Media Player Setup Media Player Setup Menu Toshiba Places Jump to Toshiba Places Function Photo Frame Jump to Photo Frame On Timer On Timer Menu Sleep Timer Sleep Timer Menu... -
Page 17: Programming Channels Into
Getting started ATV Manual Tuning - analogue - Programming channels into the Use the Manual Tuning operation if desired channels TV’s channel memory cannot be preset by Auto Tuning or if you would like to preset channels to specific position numbers one by one. Auto Tuning From the System Setup menu, press s or r to Auto Tuning will completely re-tune the TV and can be... - Page 18 Getting started DTV Manual Tuning G. Search operation - digital - Press r to search up the band or s to search This feature is available for service engineers or can be used down the band� for direct channel entry if the multiplex channel is known� Press s or r repeatedly until your desired channel is displayed�...
- Page 19 Getting started Channels Sort Line No. 1/10 Sorting Type Number Pos. Name Sort Press v or w to set the sorting rule� Number mode: Position No� order (numerical sequence) A-Z Sort mode: Station name order (A to Z) Line Number Jump — Press the Number button Press s to select Sort and press OK �...
-
Page 20: Channel And Press Ok To View
Getting started Watching TV programmes System Setup Menu Language English Auto Tuning Antenna ATV Manual Tuning Programme Selection DTV Manual Tuning DTV Settings Quick Setup Digital programmes Auto Location Software Upgrade After you have tuned the TV, you have several ways to navigate through all programmes: Displaying the on-screen information •... -
Page 21: Hdmi Information Display
Getting started • Subtitle availability ( Press v or w to select On or Off � • Parental rating: G, PG, M, MA, AV, R, etc. HDMI signal information is as follows: • Dolby Digital audio track availability (indicated by ®... -
Page 22: Using The Tv's Features (General)
Using the TV’s features (General) • Most of the picture/sound controls and functions are Cinema available in both digital and analogue modes� However, When watching “all sides panel format” films/video tapes, features not available will be greyed out� this setting will eliminate or reduce the black bars on all sides of the screen by zooming in and selecting the image without distortion�... -
Page 23: Picture Mode
Using the TV’s features (General) PC Wide From the Display Settings in the Preferences Use this setting for a PC connected via HDMI or RGB/ menu, press s or r to select Picture Position � PC terminal when receiving PC signal format� This setting will display the image without picture clipping�... -
Page 24: Picture
Using the TV’s features (General) Using ClearScan 200Hz • To set another Picture Mode, use for the Picture menu. This function eliminates motion blur without adding flicker or reducing image brightness and improves the Activating the picture preferences viewing quality of a motion picture� You can customise current Picture Mode settings as From the Advanced Picture Settings menu, press desired�... - Page 25 Using the TV’s features (General) Resetting Base Colour Adjustment Press OK to confirm the adjustment. The reset function returns base colour adjustment to the To cancel the adjustment when selecting a point, select factory settings� Cancel and press OK � To return the settings of all points to the factory From the Base Colour Adjustment menu, press defaults, select Reset and press OK �...
-
Page 26: Motion Detection Range
Using the TV’s features (General) Notes: From the Expert Picture Settings menu, press s • This feature may not work properly depending on or r to select RGB Filter and press OK � the content. • Adjustable range varies according to the Picture Press s or r to select Red , Green or Blue and Mode you set. - Page 27 Using the TV’s features (General) When 10P is selected: Auto Colour Calibration Press s to select 10P White Balance . From the Colour Calibration menu, press s or r to select Auto Colour Calibration and press OK . Press s or r to select IRE (white level), Red , Green or Blue .
-
Page 28: Sound Adjustment
Using the TV’s features (General) Stereo and Bilingual transmissions From the Picture menu, press s or r until Control Visualization is selected and press OK � The For ATV programmes histogram window will appear� If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time Control Visualization Distribution... -
Page 29: Headphone Level
Using the TV’s features (General) Adjusting Audio Level Offset Sound Navigation TV Mounting Stand Sometimes there can be large changes in volume when Equalizer switching from a DTV 5�1ch to a DTV 2ch, an ATV channel, or an external input� Using this feature reduces Cancel these volume differences�... -
Page 30: Activating Blue Screen
TV will switch off and can only be brought out of standby by using the If you want to obtain extra 3D glasses: remote control. Toshiba provides additional 3D glasses and can be obtained from: Setting Automatic Power Down For Australia www�shoptoshiba�com�au The TV will automatically turn itself off (standby) after * As of April 2011�... - Page 31 Using the TV’s features (General) • Do not drop, exert pressure on, or step on the • When viewing 3D images, always wear 3D 3D glasses. glasses. Doing so may damage the glass section, which may Watching 3D images without specified 3D glasses may result in injury�...
-
Page 32: Using 3D Functions
• When cleaning the 3D glasses, gently wipe with a Notes: dry, soft cloth. • Compatible Toshiba 3D glasses (supplied). - First, remove any dirt or dust from the 3D Glasses. • Compatible 3D playback device or 3D source. - Harsh rubbing or use of a dirty or coarse cloth •... - Page 33 Using the TV’s features (General) Trigger of Switching 3D format Description Display Mode Quick menu Side by Images for the left and right eyes Input Signal Side (SBS) are positioned side-by-side� Additional Source Top and Images for the left and right eyes Type Format Information...
- Page 34 Using the TV’s features (General) Option Description Press v or w to select Side by Side , Top and Bottom or Native � Displays as 3D mode automatically when Trigger of Switching 3D format signal with 3D Auto Detect Quick menu Display Mode Information is received�...
-
Page 35: The Timers
Timer and press OK to save the timer� r select 3D Test Pattern � The Programme Timer indicator ( - page 9) will Put on the TOSHIBA 3D glasses (supplied)� appear orange� Adjust your viewing position so that there is no double Press P u to advance to the next page, or press P U to image effect�... -
Page 36: Sleep Timer
Using the TV’s features (General) On Timer Press EXIT to start the timer� Enable On Timer To cancel the sleep timer: Enable DTV Clock 00:00 Power On Time Press s or r until the time is set to 00:00� Repeat Once Input Resetting the TV... -
Page 37: Selecting The Video Input Source
Using the TV’s features (General) Selecting the video input source Setting the Colour System At any time by pressing o on the remote control or From the System Setup menu, press s or r to TV, a list will appear on screen showing all inputs and select Colour System �... -
Page 38: Labeling Video Input Sources
TV Speakers or Amplifier � The Amplifier option This feature uses CEC (Consumer Electronics Controls) allows the remote control to adjust or mute the volume of technology and allows the control of Toshiba REGZA- the external audio� LINK compatible devices from the TV remote control via Notes: HDMI connection ( - page 53)�... -
Page 39: Speakers
Using the TV’s features (General) if TV Speakers has been selected. Turn the TV to Inputs standby and on again to output the sound from the TV speakers. • The above functions are dependent on the connected device and TV setting. HDMI 1 REGZA-LINK HDMI 2... -
Page 40: Teletext
Please refer to the owner’s manual for all stored for each colour button� the connected devices. Sub-pages To connect the Toshiba PC compatible with The pages on the screen will dynamically update as sub- REGZA-LINK pages are received� This feature automatically adjusts the suitable widescreen... -
Page 41: Teletext Buttons On The Remote Control
Using the TV’s features (General) C To enlarge the teletext display size: TEXT M00 14:58:55 Press C once to enlarge the top half of the page, and press again to enlarge the bottom half of the page� Press again to revert to the normal size� D To select a page while viewing normal picture: Green... -
Page 42: Subtitle And Audio
Using the TV’s features (General) Subtitle and Audio Selecting Subtitles - digital - In digital mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast� From the DTV Settings menu, press s or r to select Subtitle and Audio and press OK �... -
Page 43: Other Digital Tv Features And Settings
Other Digital TV features and settings Using the Genre Colour Search Using the EPG (Electronic From the guide screen, you can use the genre selection and Programme Guide) search features� Press the QUICK button from the guide screen� Select the on-screen guide by pressing GUIDE , and the guide screen will appear highlighting details of the Press s or r to select Genre Colour in the Quick channel and programme currently being viewed�... -
Page 44: Selecting Favourite Channels
Other Digital TV features and settings Digital settings - Channel Options Press w repeatedly to select the lock box� Press OK to select� A check mark will appear in the box� Selecting favourite channels If a PIN has already been set, PIN entry will be Favourite Channels creates a list of the digital channels required to set locked channels�... -
Page 45: Network Upgrade
MA and above, Block AV and above, Block R and above� To view blocked programmes, enter the PIN� Network Upgrade TOSHIBA may offer upgrades for the TV’s software in Using the System Information the future� The TV’s software is upgraded via the Network�... -
Page 46: Setting The Digital Audio
Other Digital TV features and settings when the signal is changed. Setting the Digital Audio • Depending on the connected equipment (amplifier, etc.), adjustment may not be possible. Digital Audio Output • When the optical digital output setting (AutoPCM) is changed, it may be necessary to adjust the When connecting a surround sound amplifier to the digital timing again. -
Page 47: Connecting Your Tv
Connecting your TV • Most of the picture/sound controls and functions are Notes: available in both digital and analogue modes� However, • DO NOT connect the DIGITAL AUDIO output features not available will be greyed out� terminal to the AC-3 RF input of a Dolby Digital Receiver with a built-in Dolby Digital decoder. -
Page 48: Connecting Hdmi And Dvi Devices
Connecting your TV Connecting an amplifier equipped with a 480i, 480p, 576i, 576p, 720p (50 Hz/60 Hz) and VGA (VESA 640×480 @ 60/72/75 Hz) signals� digital audio (optical) input • HDMI : High-Definition Multimedia Interface Amplifier equipped with • DVI : Digital Video Interface digital audio input •... -
Page 49: Connecting A Dvi Device
Connecting your TV Connecting a HDMI audio system Note: It is possible that some HDMI devices may not One HDMI cable (type A connector) is needed� operate properly with this TV. AV amplifier corresponding to ARC Connecting a DVI device Back of TV One HDMI (type A connector) -to-DVI adapter cable and analogue audio cables are needed�... -
Page 50: Setting The Hdmi 3 Audio Mode
Connecting your TV Notes: AV Connection • If your HDMI connection is capable of 1080p and/ Input Labeling PC/HDMI 3 Audio or your TV is capable of refresh greater than 50 Hz Side Shared Audio EXT 2 or supports Deep Colour, you will need a Category HDMI 3 Audio Digital 2 cable. - Page 51 Connecting your TV Notes: Connecting a PC to the HDMI terminal on the TV: • Some PC models cannot be connected to this TV. When connecting a PC to the HDMI terminal on the TV, • There is no need to use an adapter for a computer use an HDMI-to DVI adapter cable and analogue audio with a DOS/V compatible mini D-sub 15 pin cables�...
-
Page 52: Using The Pc Settings
Connecting your TV Adjusting the sampling clock Using the PC Settings If the sampling clock does not match with the dot clock frequency of the PC, picture details will be blurred, screen • First, press o to display the video input mode list and width will change, or drift patterns in vertical lines may be press s or r and OK in order to select PC input mode apparent�... -
Page 53: Regza-Link Connection
HDMI cables with the HDMI Logo ( • This function is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to the individual owner’s manuals for compatibility information. -
Page 54: Personal Mode
From the Preferences menu, press s or r to select Connecting a home network Personal TV Setup and press OK � Personal TV Setup The LAN port allows your Toshiba TV to connect to Personal Mode A your home network. You can use this revolutionary home Personal Mode B... -
Page 55: Using Your Home Network
• The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n), as defined and approved by the Institute of Electrical and Electronics Engineers� • The TOSHIBA Dual Band WLAN Adaptor is intended for use this TV and should not be used with any other devices�... -
Page 56: Wireless Setup
WLAN Adaptor is not connected or Network Type guidelines found in radio frequency safety standards is set to Wired. and recommendations, TOSHIBA believes Wireless • Continued connection of AP (Access Point) is not LAN is safe for use by consumers� These standards and guaranteed. - Page 57 Connecting your TV To cancel searching for the AP: • There is only one key ID to set for WEP encryption. Press BACK while searching for the AP� A message will Select Done and press OK � appear and press v or w to select Yes and press OK � Note: Easy Setup using PIN (Personal Identification If Network Name is not displayed, see step 4...
-
Page 58: Wireless Information
Connecting your TV Item Description Select Done and press OK � Mode Working mode (11a, 11b, 11g, 11n) Note: When Encryption is None, a message will Channel Channel in use (1-165) appear. Press v or w to select Yes and press Network Name SSID set Authentication Authentication set Note:... - Page 59 Connecting your TV IP Address Setup Note: If you manually set the IP address, you must not use Auto Setup: the same IP address for any other device. The IP address you use should be a private address. From the Preferences menu, select Network Setup and press OK �...
-
Page 60: Network Connection Test
Connecting your TV Note: Press s or r to select MAC Address and press If BACK is pressed, changes are not saved OK � and the software keyboard window is closed. The text will remain as it was before starting the Network Connection Test keyboard. -
Page 61: Device Name Setup
16� This feature allows you to set the maximum volume of the Note: TV when it receives volume operation commands from a Toshiba does not guarantee normal operation with DMC� all connected devices. Terminology: From the Media Renderer Setup menu, press s or DMS: DLNA CERTIFIED™... -
Page 62: Using Toshiba Places
(- page 44). • Though the same volume value, an actual volume might be greatly different depending on content. Press Menu and v or w to select the Toshiba • This TV might take time to the start-up and the Places menu�... - Page 63 Connecting your TV Switching the pointer Item Settings The tool that operates the screen can be changed to the Normal: Displays YouTube page with the size as it is. pointer or the drag mode� Display Mode Just-Fit Rendering: Displays YouTube with a size adjusted to exactly fit the suitable width for this TV.
-
Page 64: Basic Operation
You must obtain any required permission from copyright owners to download or use copyrighted content� • When OK is pressed, a detailed information window TOSHIBA cannot and does not grant such permission� will appear� • When the BLUE button is pressed, Disable or Basic operation Enable bar will appear�... -
Page 65: Viewing Photo Files
Connecting your TV Selecting a file in the list of content: Press s or r to select USB Auto Start and press v or w to select On or Off � Press s or r to select a file or folder. Press OK to move to the next layer, or press BACK to Media Player Setup USB Auto Start... -
Page 66: Sort
Connecting your TV The pictures are displayed using thumbnail data in each Press v / w to view the previous/next photo� image file. Press s or r to rotate the photo� Photo list example Press to display file status information. Note: Depending on the video resolution of the file, Picture Size may not be greyed out. - Page 67 Connecting your TV With the desired file selected, press OK or c to start Item Description playback� File Name File sorting rules: Notes: (USB) 1� Unicode priority • On preview screen, if you highlight the file or Title 2� (0, 1, ���, 9), capital alphabet (A, B, ���, Z), without pressing OK, the content is played on (DMS) small alphabet (a, b, ���, z)
- Page 68 Connecting your TV ® Press s or r to select DivX VOD Registration Mode Description and press OK � The file is played back only once. ® The DivX VOD window will appear and you will see Files in the same folder are repeatedly played back� the registration code�...
-
Page 69: During Playback
Connecting your TV The Number button is used for direct jump� If the 3 button With the desired file selected, press OK or c to start is pressed, playback will jump to the beginning of 3rd playback� It is played in full screen mode� Press the chapter�... -
Page 70: Using The Photo Frame Feature
Connecting your TV Selecting the Shuffle mode: Using the Photo Frame feature From the Quick Menu , press s or r to select • You can use the TV screen as a digital picture frame. Shuffle � One image (pre-installed or user-installed) can be Press v or w to select On or Off �... -
Page 71: Setting The Features
Connecting your TV To close Photo Frame Set the following items as desired� Rotate : Press OK to rotate the image 90° clockwise� Press EXIT � Delete : Press s or r to select Delete and tpress Setting the features OK �... -
Page 72: Reference Section
Reference section No REGZA-LINK operation Troubleshooting • The REGZA-LINK feature is available for Toshiba REGZA-LINK compatible devices� Before calling a service technician, please check the following • Make sure HDMI cables with the HDMI logo are used. table for a possible cause of the symptom and some solutions�... -
Page 73: Appendix
Reference section APPENDIX PARENTAL GUIDANCE CODES (Normative) Recommended On-Screen-Display for parental guidance codes transmitted within DVB-SI EIT information using the DVB parental_rating_descriptor� Receiver Menu Set-up and Suggested OSD wording for Setting Blocking (Restriction of access) Block G Block Block Block Block Block and above... -
Page 74: Media Player Supported Format
Reference section Media Player Supported Format Media Media File Video/Audio codec USB DMS Note Player Format Extension Photo JPEG �jpg JPEG <USB> �jpeg Data compatibility: JPEG Exif ver 2�2 Maximum viewable resolution: 4096 × 4096 (HW decode) 16384 × 16384 (SW decode) Maximum photo size: 9 MB Maximum number of files: 2000 / folder <DMS>... - Page 75 Reference section Bandwidth 7 MHz and Proposed 8 MHz Channel Frequencies BAND III Australian 7 MHz 7 MHz 8 MHz 8 MHz 8 MHz 7 MHz Channel Digital Channel Digital Designated Designated Frequency Channel Frequency Channel Channel Channel Limits Centre Freq Limits Centre Freq Number...
- Page 76 Reference section Australian 7 MHz 7 MHz 8 MHz 8 MHz 8 MHz 7 MHz Channel Digital Channel Digital Designated Designated Frequency Channel Frequency Channel Channel Channel Limits Centre Freq Limits Centre Freq Number Number (MHz) (MHz) (MHz) (MHz) 652-659 655�5 670-678 659-666...
- Page 77 Reference section Signal Class Table C mode RF Frequency [MHz] RF Frequency [MHz] RF Frequency [MHz] 48�25 687�25 252�25 55�25 695�25 259�25 62�25 703�25 266�25 175�25 711�25 273�25 182�25 719�25 280�25 189�25 727�25 287�25 196�25 735�25 294�25 203�25 743�25 303�25 210�25 751�25 311�25...
- Page 78 Reference section 3D signal formats Aspect Pixel Clock Resolution V. Frequency H. Frequency 3D Structure ratio Frequency Side by Side (Full) 720 × 480p 16:9 59�940/60�000 Hz 31�469/31�500 kHz 27�000/27�027 MHz Side by Side (Half) Top and Bottom Side by Side (Full) 720 ×...
-
Page 79: Specifications
1080i (50/60 Hz) Integrated Digital LCD TV (These signal formats are converted to match the number of pixels of the LCD panel�) Model 47VL800A Colour system (analogue TV system) PAL, SECAM, NTSC 3�58/4�43 Power source AC 220 V-240 V, 50 Hz... -
Page 80: Supplied Accessories
Temperature 0°C - 35°C Optional accessories Humidity 20% - 80% (No moisture TOSHIBA Dual Band WLAN Adaptor WLM-10U1 condensation) • Design and specifications are subject to change without notice� • Never service or remodel the TV by yourself. It may...