Connecting Your Tv; Connecting External Equipment - Toshiba REGZA 32RL833G Manual

Hide thumbs

Table Of Contents

Table of Contents

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch,

remove the mains plug from the wall socket.

Power cord

FIXING STRAP

COMPONENT VIDEO INPUT

(EXT 2)

LAN port

DIGITAL AUDIO OUTPUT

(OPTICAL)

SCART (EXT 1)

Aerial Cable

Media Recorder

Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the television.

If you use a decoder and/or a media recorder, it is essential

that the aerial cable is connected through the decoder and/or

through the media recorder to the television.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television.

Connect the decoder TV socket to the television.

Before running Auto Tuning, put your decoder and media

recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO

INPUT sockets will accept L and R audio signals.

The Digital Audio Output socket enables the connection of a

suitable surround sound system.

NOTE: This output is always active.

ILLUSTRATION SHOWS 42RL833.

HDMI® (High-Definition Multimedia Interface) is for use with a

DVD decoder or electrical equipment with digital audio and

video output.

For acceptable video or PC signal formats through the HDMI

terminals, see page 74.

NOTE: Although this television is able to connect to HDMI

equipment, it is possible that some equipment may not

operate correctly.

LAN port is used to connect the TV to your home network.

This TV can play digital content stored on a DLNA CERTIFIED™

product with server function.

A wide variety of external equipment can be connected to

the back of the television; therefore, the relevant owner's

manuals for all additional equipment must be referred to

for exact instructions.

If the television automatically switches over to monitor

external equipment, return to normal television by pressing

the desired programme position button. To recall external

equipment, press

to select between DTV, EXT 1, EXT 2,

EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.

When the external input mode is selected while viewing DTV

mode, the SCART socket does not output video/audio signals.