Scan Settings; Image Quality; Density - Canon FAX-L160 Reference Manual

Before Using the
Machine 1

Scan Settings

Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing (FAX-L160
Only)
5
System Manager
Settings 6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
You can adjust the image quality and density of the document
you send. The higher image quality you set, the better the
output will be, but the longer the transmission will take.
These settings return to the default values after all documents are scanned.
If you want to keep the settings, set the density and/or image quality as
following;
[Menu] → <FAX SETTINGS> → <USER SETTINGS> → <STANDARD
SETTINGS> → <DENSITY> or <IMAGE QUALITY>
(See "Setting Menu, " on p. 9-5.)

Image Quality

The default setting is <STANDARD>.
1.
Press [Image Quality].
2.
Press [ ] or [ ] to select the resolution, then
press [OK].
<STANDARD>: for most text-only documents (200 x 100 dpi)
<FINE>: for fine-print documents (the resolution is twice that of
<STANDARD>) (200 x 200 dpi)
<PHOTO>: for documents that contain photographs (the resolution
is twice that of <STANDARD>) (200 x 200 dpi)
<SUPER FINE>: for documents that contain fine print and images
(the resolution is four times that of <STANDARD>) (200 x 400 dpi)
Back Previous

Density

The default setting is (5).
1.
Press [Density].
2.
Press [ ] or [ ] to adjust the density, then
press [OK].
Ex.
D E N S I T Y
- L T
[ ]: to make dark documents lighter.
[ ]: to make light documents darker.
TOP
Next
D K +
3-6