Switching Temporarily To Tone Dialing; Redialing; Sending And; Sending And Receiving - Canon FAX-L160 Reference Manual

Before Using the
Machine 1
Document and Paper
2

Sending and

Receiving 3
Copying
4
Printing (FAX-L160
Only)
5
System Manager
Settings 6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index

Switching Temporarily to Tone Dialing

If your machine is set for pulse dialing, use the procedure below to
switch to tone dialing to use information services (e.g., banks, airline
reservations, and hotel reservations).
To talk to the other party, you will need to connect the optional handset or
an external telephone to the machine.
1.
Press [Hook].
You can also lift the handset instead.
Make sure to confirm the dial tone before entering a fax number. If
you enter the number before the dial tone can be heard, the call may
not be connected, or the wrong number may be dialed.
2.
Use the numeric keys to dial the required
information service.
3.
When the recorded message of the information
service answers, press [ Tone] to switch to tone
dialing.
If you pressed [Hook] in step 1, you can pick up the handset to talk to
the other party.
Back Previous
4.
Use the numeric keys to enter the numbers
requested by the information service.
5.
If you want to receive faxes, press [Start].
– If you are using the external telephone, hang up the handset
after pressing [Start].
– If you are using the optional handset, hang up to disconnect the
call.

Redialing

Redialing can be done manually or automatically. For automatic
redialing, you can set how many times the machine redials and the
time between redials.
Redialing Manually
1.
Set documents.
2.
Press [Redial/Pause].
3.
Press [Start].
When <RESTRICT REDIAL> is set to <ON> in the <ACCESS TO DEST.>
of the <SYSTEM SETTINGS> menu, redialing is not available.
TOP
Next
3-19