Manual Reception; Memory Reception; Appendix - Canon FAX-L160 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing (FAX-L160
Only)
5
System Manager
Settings 6
Maintenance
7
Troubleshooting
8

Appendix

9
Table of Contents
Index

Manual Reception

When you select <Manual> in <RX MODE>, follow the procedure
below to receive a fax.
1.
When the telephone rings, pick up the optional
handset/the external telephone or press [Hook].
2.
Confirm that the modem's connecting sound is
heard, then press [Start].
3.
Hang up the optional handset or the external
telephone.
Back Previous

Memory Reception

The machine automatically receives faxes in memory when printing
is disabled under certain conditions (e.g., toner or paper has run
out).
Load paper and press [OK] to start printing faxes stored in memory.
For toner empty, the machine automatically starts printing when
the error is cleared.
– The machine memory can store up to 346 fax jobs or approximately 346
pages.*
* Based on the condition that the other party sends the fax by FAX-L160
with ITU-T Standard Chart No.1, standard mode. The maximum number
of pages that the machine's memory can store differs depending on the
other party's machine.
– Once the pages are printed, they are deleted from the memory.
– If the memory becomes full, you will not be able to receive the remaining
pages. Contact the other party and ask them to resend the remaining
pages of the fax.
TOP
Next
3-25