Specifying Recipients; Using One-Touch Speed Dialing Keys; Using Coded Speed Dialing Codes - Canon FAX-L160 Reference Manual

Before Using the
Machine 1

Specifying Recipients

Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing (FAX-L160
Only)
5
System Manager
Settings 6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Follow the procedure below to send documents to registered
recipients.

Using One-Touch Speed Dialing Keys

You can specify up to 15 recipients using one-touch speed dialing
keys.
To use this feature, you must register recipients in one-touch speed dialing
keys beforehand. (See "Storing/Editing Address Book, " on p. 3-7.)
1.
Set documents.
If you want to adjust the image quality and density, see "Scan
Settings, " on p. 3-6.
2.
Press the desired one-touch speed dialing keys
(01 to 15).
If you pressed a wrong key, press [Stop/Reset] and try again.
Ex.
= 0 1 2 3 X X X X X X
[ 0 5 ] C A N O N
3.
Press [Start].
Back Previous

Using Coded Speed Dialing Codes

You can specify up to 100 recipients using coded speed dialing
codes.
To use this feature, you must register recipients in coded speed dialing
codes beforehand. (See "Storing/Editing Address Book, " on p. 3-7.)
1.
Set documents.
If you want to adjust the image quality and density, see "Scan
Settings, " on p. 3-6.
2.
Press [ Coded Dial].
3.
Enter the desired two-digit code (00 to 99) with
the numeric keys.
Ex.
= 0 1 2 X X X X X X X
[ * 0 1 ] C A N O N
If you entered a wrong code, press [Stop/Reset], then try again from
step 2.
4.
Press [Start].
TOP
Next
3-14