Related Manuals for Intek KT-980HP
Summary of Contents for Intek KT-980HP
-
Page 1: Instruction Manual
DUAL BAND AMATEUR RADIO VHF / UHF FM POCKET SIZE HANDHELD TRANSCEIVER 144-146 MHz / 128CH / 8W 430-440 MHz / 128CH / 7W PC PROGRAMMABLE INSTRUCTION MANUAL... -
Page 2: Declaration Of Conformity
(to EC Directive 1999/5/EC) DECLARATION OF CONFORMITY With the present declaration, we certify that the following products : INTEK KT-980HP comply with all the technical regulations applicable to the above mentioned products in accordance with the EC Directives 1999/5/EC. Type of product :... -
Page 3: General Description
SAFETY TRAINING INFORMATION Your KT-980HP generates RF electromagnetic energy during transmitting mode. This radio is designed for and classified as "Occupational Use Only", meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards.This radio is NOT... - Page 4 INTEK S.R.L. declines any responsibility concerning any modification of the product, made by the user or by a third party, after delivery of the product.
- Page 5 PRECAUTIONS - Refer service to qualified technicians only. - Do not disassemble or modify the transceiver for any reason. - Do not expose the transceiver under direct sunlight long or to extremely hot condition. - Do not place the transceiver on the unstable surface. - Keep the transceiver out of dust, moisture, water.
- Page 6 UNPACKING AND CHECKING EQUIPMENTS / OPTIONAL ACCESSORIES INSTALLATION OF ACCESSORIES POWER LEVELS AND RADIO OPERATION 07-09 PARTS, CONTROLS AND KEYS LCD DISPLAY ADVANCED OPERATION 12-14 -R-DCS (SETTING RECEIVE DCS) / R-CTCS (SETTING RECEIVE CTCSS) -T-DCS (SETTING TRANSMIT DCS) / T-CTCSS (SETTING TRANSMIT CTCSS)
- Page 7 30-31 TROUBLESHOOTING SPECIFICATIONS GENERAL INFORMATION...
- Page 8 Dual Band (144-146 MHz / 430-440 MHz) High / Mid / Low RF Power Selection FM Radio (87.5-108 MHz)
- Page 9 External Earset-Microphone with flexible boom mic and tie clip KME-H115 External Speaker-Microphone (light duty) KST-301 External Speaker-Microphone (heavy duty) ESM-960 External Earset-Microphone Smile Design KPG-33 PC interface USB cable Please check www.intek-radios.com for any new available accessory for your radio. - 1 -...
- Page 10 - Do not touch or hold the antenna with your hand or wrap the outside of it to avoid bad operation of the transceiver - 2 -...
- Page 11 - 3 -...
- Page 12 - 4 -...
- Page 13 EXTEND BATTERY LIFE - 5 -...
- Page 14 POWER LEVELS AND RADIO OPERATION GENERAL INFORMATION The new Dual Band handheld radio INTEK KT-980HP is the new High Power version of the well known model KT-960 PLUS (UV-5R). The main difference and feature of model KT-980HP is the new transmitter circuit design which is equipped with a RENESAS RQA0011DNS Silicon N-Channel RF power MOSFET semiconductor, rated at 10,47W with +40.2 dBm (f=520 MHz), but derated to 8,00W max for optimum and stable operation.
- Page 15 VHF/UHF DUAL BAND TRANSCEIVER 1. Antenna (Dual Band) 7. PTT Key (Push-To-Talk) 13. BAND Key (Band switch) 2. Flashlight 8. VFO/MR (Freq. Mode/CH Mode) 14. Keypad 3. Knob (ON/OFF, Volume) 9. LED Indicator 15. SP.&MIC. 4. LCD Display 10. Strap Buckle 16.
- Page 16 radio (band 65-75 MHz and 87.5-108 MHz). - 8 -...
- Page 17 [BAND] BUTTON Press this key to select the desired band (VHF or UHF). In FM Radio mode, press this key to switch the band (65-75 MHz / 87.5-108 MHz). station. Note: this setting is not available when TDR function (Dual Watch / Dual reception) is enabled. Used to enter information for programming the radio's lists and the non-standard CTCSS.
- Page 18 RF Transmitter Power Level (High / Mid / Low). - 10 -...
- Page 19 Use Numeric Keypad to direct input the desired frequency or channel number. - 11 -...
- Page 20 - 12 -...
- Page 21 - 13 -...
- Page 22 - 14 -...
- Page 23 2. TXP (High / Mid / Low Power Selection) (Menu+2) In standby mode, press [MENU] + [2TXP] keys; the LCD will show the TXP indication. Press [MENU] key again then press keys to select the desired power level (HIGH, MID or LOW). Press [MENU] key to confirm then press [EXIT] key to return to standby.
- Page 24 - 16 -...
- Page 25 - 17 -...
- Page 26 - 18 -...
- Page 27 - 19 -...
- Page 28 - 20 -...
- Page 29 - 21 -...
- Page 30 - 22 -...
- Page 31 - 23 -...
- Page 32 - 24 -...
- Page 33 - 25 -...
- Page 34 Radio has 2 bands: VHF 144-146 (136-174) MHz / UHF 430-440 (400-470) MHz (*) - 26 -...
- Page 35 - 27 -...
- Page 36 - 28 -...
- Page 37 - 29 -...
- Page 38 - 30 -...
- Page 39 - 31 -...
-
Page 40: Specifications
SPECIFICATIONS General Frequency VHF 144-146 MHz (136-174 MHz) (*) UHF 430-440 MHz (400-470 MHz) (*) Channels Channel steps 2.5, 5, 6.25, 10, 12.5, 25 KHz DC input voltage 7.4 VDC Standard Battery 1800mAh Operating temperature -20/+60° Dimensions / Weight mm 58 x 110 x 32 (main body) / 205 gr. ≤75mA Current Drain (Stand-By) Receiver... -
Page 41: General Information
As regulations are usually subject to possible modifications, please check the current regulations in your country with your dealer or local supplier. INTEK does not take any responsibility for illegal use and operation of this product not in accordance with the regulation of the country where the product is used. - Page 42 Notes...
- Page 43 Notes...
Need help?
Do you have a question about the KT-980HP and is the answer not in the manual?
Questions and answers