Lorex LNC201 User Manual page 176

NOTE: You may also select both PIR and Motion to receive alarms from both motion
triggers.
• Schedule: Send email alarms based on the settings configured under Schedule. see
"Scheduling (Configuring Recording and Alarm Schedules)" on page 182.
• Disable: Disable email alarms.
2. If you have selected Motion, under Motion Sensitivity, select the motion detection
sensitivity between 1 (High) and 10 (Low). If Motion Detection Sensitivity is set to 1,
motion detection will be triggered if a moving object is larger than 1% of the video
area. If it is set to 10, a moving object must be larger than 10% of the video area to
trigger motion detection.
NOTE: This setting does not affect the PIR motion detector.
3. Under Trigger Interval, enter the minimum time (in seconds) the camera will wait in
between email alarms. If this Interval is set too low, you may receive a lot of
messages.
4. Under Email Recipient, enter up to 3 email addresses that will receive email alarms.
5. Click Save & Apply to save email alarm settings.
NOTE: If you want to use a custom SMTP server to send Email messages, click Advanced,
enter your SMTP server information, and click Save & Apply.
Configuring Camera Settings using a Web Browser
161